3-3. Troubleshooting (BKDS-7015)
3-3-1. Tools and Equipment Required for Troubleshooting
3-3. Troubleshooting (BKDS-7015)
3-3-1. Tools and Equipment Required for Troubleshooting
1. Test terminal with connector
Required for all test menus except "Communication test".
(1) Terminal software
VT100 or VT100 equivalent
(2) Communication system
RS-232C
Baud rate
Data length
Parity
Stop bit
(3) Test connector to connect this unit
The pins-4 and -6 of the D-SUB 9-pin male connector are shorted, and pins-7 and -8 of it are shorted.
(Refer to the section 3-3-2.)
3-10
9600 bps
8 bits
—
1 bit
DVS-7200AE MMP1