La San Marco TOP 85 Use And Maintenance page 57

8.3 Programming the boiler temperature
Screen 8
BOILER TEMP.
8.4 Date/time programming
Screen 9
TIME - DATE
FRI
8.5 Programming automatic on/off
Screen 10a
Screen 10b
56
Boiler temperature programming screen.
This screen is used to adjust the boiler temperature and to set the
reading to °C or °f.
Pressing  sets the temperature in °C.
Pressing  sets the temperature in °f.
Pressing + increases the value of the step 1 temperature (°C or °f).
Pressing - decreases the value of the step 1 temperature (°C or °f).
The value can be set from a minimum of 80°C (176°f) to a maximum
of 128°C (262°f).
Default setting: 120°C (248°f)
Press Ok to confirm the change.
Press NEXT to go to the next screen.
If the NEXT button is not selected within 30 seconds, the machine
ready screen will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
Date/time programming screen.
This screen is used to set the date and time.
When the screen is accessed, the time will flash. Pressing the  / 
buttons will move the selection and once the value to be adjusted
has been selected (in order from left to right, hour, minutes, day of
the week, day, month and year) pressing + / - changes the value.
Press Ok to confirm the change.
Press NEXT to go to the next screen.
If the NEXT button is not selected within 30 seconds, the machine
ready screen will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
AUTO ON programming screen.
This screen is used to activate/deactivate and set the automatic ON
for the machine every day.
Pressing the  /  buttons moves the selection.
If the CLOCk icon is selected, + / - are used to activate or deacti-
vate the AUTO ON function, if deactivated (CLOCk ICON CROSSED
OUT) the following appears instead of the hour and minutes - -. - -,
if activated, the  /  buttons can be used to go to the hour and
minutes to set the required ON time using the + / - buttons.
NOTE: if switching ON has been disabled, also OFF and day off
remain automatically disabled.
Press Ok to confirm the change.
Press NEXT to go to the next screen.
If the NEXT button is not selected within 30 seconds, the machine
ready screen will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).