Safety; Qualified Personnel; Intended Use; Regulations And Approvals - Nordson A7A Customer Product Manual

A7A Modular Automatic Airless Spray Gun

Safety

Read and follow these safety instructions. Task-
and equipment-specific warnings, cautions, and
instructions are included in equipment
documentation where appropriate.
Make sure all equipment documentation, including
these instructions, is accessible to persons
operating or servicing equipment.

Qualified Personnel

Equipment owners are responsible for making sure
that Nordson equipment is installed, operated, and
serviced by qualified personnel. Qualified
personnel are those employees or contractors who
are trained to safely perform their assigned tasks.
They are familiar with all relevant safety rules and
regulations and are physically capable of
performing their assigned tasks.

Intended Use

Use of Nordson equipment in ways other than
those described in the documentation supplied with
the equipment may result in injury to persons or
damage to property.
Some examples of unintended use of equipment
include
using incompatible materials
S
making unauthorized modifications
S
removing or bypassing safety guards or
S
interlocks
using incompatible or damaged parts
S
using unapproved auxiliary equipment
S
operating equipment in excess of maximum
S
ratings
E 2006 Nordson Corporation
A7A Modular Automatic Airless Spray Gun

Regulations and Approvals

Make sure all equipment is rated and approved for
the environment in which it is used. Any approvals
obtained for Nordson equipment will be voided if
instructions for installation, operation, and service
are not followed.

Personal Safety

To prevent injury follow these instructions.
Do not operate or service equipment unless you
S
are qualified.
Do not operate equipment unless safety
S
guards, doors, or covers are intact and
automatic interlocks are operating properly. Do
not bypass or disarm any safety devices.
Keep clear of moving equipment. Before
S
adjusting or servicing moving equipment, shut
off the power supply and wait until the
equipment comes to a complete stop. Lock out
power and secure the equipment to prevent
unexpected movement.
Relieve (bleed off) hydraulic and pneumatic
S
pressure before adjusting or servicing
pressurized systems or components.
Disconnect, lock out, and tag switches before
servicing electrical equipment.
While operating manual spray guns, make sure
S
you are grounded. Wear electrically conductive
gloves or a grounding strap connected to the
gun handle or other true earth ground. Do not
wear or carry metallic objects such as jewelry or
tools.
If you receive even a slight electrical shock,
S
shut down all electrical or electrostatic
equipment immediately. Do not restart the
equipment until the problem has been identified
and corrected.
1
Part 1072609- 02