Halogenated Hydrocarbon Solvent Hazards; Action In The Event Of A Malfunction; Disposal - Nordson A7A Customer Product Manual

Provide adequate ventilation to prevent
S
dangerous concentrations of volatile particles or
vapors. Refer to local codes or your material
MSDS for guidance.
Do not disconnect live electrical circuits when
S
working with flammable materials. Shut off
power at a disconnect switch first to prevent
sparking.
Know where emergency stop buttons, shutoff
S
valves, and fire extinguishers are located. If a
fire starts in a spray booth, immediately shut off
the spray system and exhaust fans.
Shut off electrostatic power and ground the
S
charging system before adjusting, cleaning, or
repairing electrostatic equipment.
Clean, maintain, test, and repair equipment
S
according to the instructions in your equipment
documentation.
Use only replacement parts that are designed
S
for use with original equipment. Contact your
Nordson representative for parts information
and advice.
Halogenated Hydrocarbon Solvent
Hazards
Do not use halogenated hydrocarbon solvents in a
pressurized system that contains aluminum
components. Under pressure, these solvents can
react with aluminum and explode, causing injury,
death, or property damage. Halogenated
hydrocarbon solvents contain one or more of the
following elements:
Element Symbol
Fluorine F
Chlorine Cl
Bromine Br
Iodine I
Check your material MSDS or contact your material
supplier for more information. If you must use
halogenated hydrocarbon solvents, contact your
Nordson representative for information about
compatible Nordson components.
E 2006 Nordson Corporation
Prefix
"Fluoro-"
"Chloro-"
"Bromo-"
"Iodo-"
A7A Modular Automatic Airless Spray Gun
Action in the Event of a
Malfunction
If a system or any equipment in a system
malfunctions, shut off the system immediately and
perform the following steps:
Disconnect and lock out system electrical
S
power. Close hydraulic and pneumatic shutoff
valves and relieve pressures.
Identify the reason for the malfunction and
S
correct it before restarting the system.

Disposal

Dispose of equipment and materials used in
operation and servicing according to local codes.
3
Part 1072609- 02