Names And Functions - Luxman L-595ASE Owner's Manual

Names and Functions

Front panel
1 2
1. Operation button (OPERATION)
This is the power on/off button.
When wiring or connection is performed, be sure to turn off
this button.
2. Operation indicator (OPERATION)
Lights up orange when the connected AC cable is plugged
into a wall socket and the operation button is set to off
(standby state).
Blinks blue during mute mode when the operation button
is activated and lights up steady blue when the operation
state is achieved after a short time. This indicator blinks
orange when the protection circuit is activated.
4
6 7 8 8
3
9 10 11 12
3. Input selectors/indicators
(INPUT SELECTOR)
These buttons select an input source from devices such
as a CD player, SACD player, D/A converter or tuner con-
nected to the input terminals.
The eight input selectors indicate LINE-1, LINE-2, LINE-3,
LINE-4, BAL LINE-1, BAL LINE-2, MM (PHONO) and MC
(PHONO) which correspond to the input terminals on the
rear panel, lighting up the input indicator for the input device
to be selected. Select MM (PHONO) or MC (PHONO) to
support the playback of analog records as follows:
MC: Selection for a low output voltage MC (moving coil)
type cartridge.
When MC is selected while using an MM type car-
tridge, be aware that the sound volume becomes
higher and an unbalanced sound lacking high frequen-
cies will be heard owing to the incorrect impedance.
MM: Selection for a high output voltage MM (moving mag-
net) type cartridge.
4 5
13 14 15