Table of Contents
Advertisement
Names and Functions
Front panel
1 2
3
1. Operation switch (OPERATION)
Toggles the power on and off.
When wiring or connection is performed, be sure to turn off
this switch.
2. Operation indicator (OPERATION)
Blinks during the time of muting, when the operation switch
is turned on and lights up when the operation state is ac-
tivated afterward. This indicator blinks when the unit is in
the muting mode or when the volume is adjusted with the
remote control.
4
4
5
17
16
15
14
6
13
12
11
10
3. Input selector (INPUT SELECTOR)
Selects an input device from the devices such as a CD play-
er, an SACD player and a tuner connected to each input
terminal.
The input selector has 7 positions consisting of LINE-4,
LINE-3, LINE-2, LINE-1, BAL LINE-1, BAL LINE-2 and
PHONO from left to right that correspond to each input ter-
minal on the rear panel. Please rotate the knob to light the
input indicator of the input device to be selected.
4. Input indicator
Lights up at the input device to be selected with the input
selector or remote control.
7
9
8
Advertisement
Table of Contents
