Advertisement
Names and Functions
Front side of main unit
1
2
1. Operation switch (stand by/on)
This switch turns the power supply ON/OFF.
When wiring or connection is performed, be sure to turn off
this switch.
2. Operation indicator (OPERATION)
Blinks in the time muting mode when the operation switch
is turned on and lights up when the operation state is ac�
tivated afterward. This indicator blinks when the unit is in
the muting mode or when the volume is adjusted with the
remote control.
2
3
4
5
6
7
20
19
18
8 9
7
17
16
15
14
3. Input selector (INPUT SELECTOR)
Selects an input device from the devices such as a CD play�
er, a Super Audio CD player and a tuner connected to each
input terminal.
The input selector has 8 positions consisting of bal.line�2,
line�4, line�3, line�2, line�1, rec�1, rec�2, and phono that
correspond to each input terminal on the rear panel. The
knob is rotated to light the input indicator of the input device
to be selected.
4. Input indicator
Lights up at the input device to be selected with the input
selector or remote control.
10
13
12
11
Advertisement
