Solar Configuration Level - Immergas VICTRIX PRO 35 1 I Instruction For Technician And Installer

Solar configuration level (..vv..)
The parameters included in this section refer to the special adjustments for solar features. The enabling is possible only if the relative activation is present
into the hydraulic section.
PARAmETER Description
01 Hysteresis ON
02 Hysteresis OFF
03 Min. run time solar pump
04 Solar collector max. temperature
05 Solar tank max. limit
06
Solar operational mode
07 Inhibition heat generation alternance (only with parameter 06=1)
08
Change priority/ parallel mode
09
Solar energy balance
SOLAR RESET Reset energy balance
11 Volumetric flow rate
12 Density HTM
13 Heat capacity HTM
Regulation Setting range / Parameters
10 (Hysteresis OFF +3 K) ... 30 K
5 2 K ... (Hysteresis ON - 3K)
3 0 ... 60 Min
120
70 ... 250 °C
75 20 ... 110 °C
1
1 Priority working
2 Parallel working
3 Piority for D.h.w
4 Piority for buffer
OFF OFF, 0,5 ... 24 h
OFF
OFF, (only with par. 06=1 and par. 07=ON)
1 ... 30 K
OFF
OFF No thermal balance
1 Thermal balance with flow rate calculation
2 Thermal balance through pulses inlet
RESET pressing the knob
0,0 0,0 ... 30 l/min o l/pulse (only for solar energy balance active)
1,05
0,8 ... 1,2 kg/l (only for solar energy balance active)
3,6 3,0 ... 5,0 kJ/kgK (only for solar energy balance active)
Page 35