Connecting A Wireless Usb Dongle; Setting The Position Of Each Of The Four Lenses - Bosch FLEXIDOME multi 7000i Installation Manual

22 en | Installation
5.2.4

Connecting a wireless USB dongle

The camera is equipped with a USB-C port for a wireless USB dongle (sold separately,
available mid of 2021), so that you can easily perform the initial configuration wirelessly. Using
a mobile device with the Bosch Project Assistant app, you can do initial set-up and lens zoom-
focus to find the right scene.
1.
For more information on Bosch Project Assistant, refer to Bosch Project Assistant, page 30 .
5.3

Setting the position of each of the four lenses

You can set the position of each multi-imager lens individually to achieve maximum flexibility.
You can do the following 4-axis lens adjustments:
1.
2.
3.
4.
2021-03 | 01 |
Audio
IN GND OUT
Connect the wireless USB dongle with a cable to the USB-C port on the camera base.
USB-C
Panning each of the four lenses over the ring, page 23 : 0º to 360º
Tilting each of the four lenses, page 23 : 0º to 105º
Rotating each of the four lenses, page 24 : -20º to 20º
Rolling each of the four lenses, page 25 : -90º to 90º
7 mm
(0.28")
GND IN
Installation manual
FLEXIDOME multi 7000i
Alarm
GND OUT
Bosch Security Systems B.V.
OUT