Bosch FLEXIDOME multi 7000i Installation Manual page 14

14 en | Installation
6.
7.
8.
9.
10. Install 4 plugs in the holes.
11. Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4
12. Install the conduit cover on the conduit plate with the bolt. Tighten the screw between
2021-03 | 01 |
Attach the conduit plate with the conduit plate adapter to the surface with a 5-6 mm
(0.2 in.) screw.
Remove the mounting plate from the box.
Mark the positions of the holes on the surface. The mounting plate has only one side
available for the conduit. Make sure to position it accordingly.
For standard installation, use the mounting holes marked with a B on the mounting plate.
For a different installation, for example for an installation on an electrical box, use
different mounting holes. For more information, refer to Installing the mounting plate,
page 12 .
Drill the 4 holes with the appropriate diameter drill to support your 5-6 mm (0.2 in.)
screws and plugs.
and 7 Nm (3 and 5.2 lbfft).
1.4 and 2 Nm (1 lbfft and 1.5 lbfft) with the TR20 Allen key.
Installation manual
FLEXIDOME multi 7000i
Bosch Security Systems B.V.