Input Of Rim Dimensions (Trucks) - Fasep B350.G3 User Manual

Fasep 2000 srl
Balatron B350.G3
5.3

Input of Rim Dimensions (trucks)

NOTE: DOUBLE OPERATOR option: this wheel balancer can be used from 2 operators in the same time. Everyone
can memorize the dimensions of the wheel to balance with <OPER> buttom. The machine memorizes the
operating procedure too.
F . 26: Posizione Asta per la misura della Distanza
IG
(only B350-TC) Press <SET>, press <diam+/-> to set CARS (MOD CAR) or TRUCK (MOD TRU). Press <SET> to
5.3.1
memorize.
F . 28: Insert wheel measures
IG
Press MODE to select the operating.
Select the diameter.
Select the distance.
Select the width.
F . 27: Lettura della Distanza
IG
F . 29: DYNAMIC -STATIC
IG
F . 30: ALU S-1
IG
F . 31: ALU S-2
IG
5-2
Rev. 1.1
10 September 2012