Calibration; How To Calibrate The Wheel Balancer B350-T - Fasep B350.G3 User Manual

Fasep 2000 srl
Balatron B350.G3
4

CALIBRATION

NOTE: the following symptoms indicate need for calibration:
a) check calibration program fails.
b) constant low or high weight readings.
c) indicated point of umbalance constantly wrong.
d) more than 2 spins required to balance wheels repeatedly.
4.1

How to calibrate the Wheel Balancer B350-T

Press <MODE/ESC> to return to normal balancing mode.
Switch on the wheel balancer.
SOF X.XX (software
Press <SET> when
version) is displayed.
Spin the empty shaft (see the picture 9).
Place the truck flange (see the picture 10).
Put the calibration weight as shown in the
picture 11.
End of calibration.
F . 9
IG
F . 10
IG
F . 11
IG
4-1
Rev. 1.1
10 September 2012