Pushloc™ Remote Service; Cable Removal - SRAM RockShox Reba Series Service Manual

P U S H L O C ™ R E M O T E S E R V I C E
C A B L E R E M O V A L
Push the remote lever until it returns toward you.
1
RLT: Use a 2 mm hex wrench to loosen the cable pinch bolt on the
2
spool and pull the cable out of the cable end slot. Use pliers to
remove the cable end.
RL: Use a 2 mm hex wrench to loosen the cable pinch bolt on the
spool. Use pliers to remove the cable end.
Disconnect the cable from the damper and pull the cable housing
3
o the cable.
Use a 2 mm hex wrench to open the cable hatch cover.
4
Push the cable through the remote until the cable head is far
enough out of the lever to access.
24
2 mm
2 mm RLT
2 mm
PUSHLOC™ REMOTE SERVICE
RL