Mandatory Instruction For Returning Good In Obl - OBL X9 Series Operating Manual

Operating manual
It is the end user's responsibility to respect the procedures and regulations in the country of operation, regarding disposing correctly of
waste resulting from maintenance (consumption material) or the demolition of equipment.
"Waste" means any substance or object that the holder intends, or requires to discard. Waste are classified according to their origin in
"urban waste" and "special waste" and also according to their harmfulness, in "dangerous waste" and "non-dangerous waste".
Waste deriving from pumps maintenance or demolition, only if properly cleaned, are classified as "special
waste". Otherwise they are to be considered as "DANGEROUS special waste".
Mixing "special waste" with "urban waste" is forbidden, and especially mixing "dangerous waste" with "non-
dangerous waste"
Briefly summarized:
there is an obligation not to dispose of "special waste" as "urban waste"
-
"special waste" must be subject of separate collection using public or private collection systems according to local laws
-
(transferred to appropriate collection points approved)
according to its use, the equipment may contain dangerous substances. Improper disposal may have adverse effects on
-
human health and the environment
fines are provided in case of misuse or improper waste disposal
-
It is strictly forbidden to dispose of waste in the sewage system or leave waste in the environment. Contact
your local waste disposal service to receive edequate and correct information.
10.

MANDATORY INSTRUCTION FOR RETURNING GOOD IN OBL

ATTENTION: OBL reserves the right to reject any goods received without previous notice !
In the interest of the customer/user, we kindly invited the SENDER to ALWAYS contact OBL customer service (Tel +39-
02-26919.1, service@obl.it) to agree the convenience or otherwise of sending/repair.
Following directions apply to ANY reasons for returnins goods to OBL, e.g.:
Servicing, maintenance, upgrading, retrofitting;
-
Funcional/Performance check, checking of Warranty applicability;
-
BRAND NEW goods return and application for credit note due to wrong ordering;
-
other...
-
10.1 MANDATORY DIRECTIONS FOR SENDER
BEFORE shipping anything to OBL, ALWAYS contact OBL customer service (+39-02-26919.1, service@obl.it) to have RA
-
number (authorisation number to return goods to OBL), returning informations and related forms;
ALWAYS properly clean ANY pieces of equipment from any residuals of products, to guarantee safety at work for OBL's staff;
-
Duly fill-in the declaration of conformity for shipping and attach it to relevant equipment (we suggest to attach it to shipment
-
documents an insert a copy in the packing);
PUMPS: DISMANTLE from the pumphead any component wetted by the fluid handled, clean them and attach
-
to relevant pump in a separate package. For plunger pumps remove and do not send "plunger packing", since
it is highly polluted by the fluid handled;
ATTENTION: Parts considered "hazardous" for improper cleaning will be replaced and quoted as a new spares
Safely pack the good in a proper manner to avoid damage during transit, and clearly indicate RA number on packing;
-
Insert in the packing copy of shipping documents and declaration of conformity for shipping (courier often keep them);
-
Ship goods DDU/DDP (always with shipping document indicating relevant RA number) to: OBL S.rl. Via Bruno Buozzi n°1 -
-
20090 Segrate (MILANO) ITALY.
10.2 CLEANING OF EQUIPMENT
Take appropriate and adequate protection measures to ensure and guarantee safety at work for the operator.
In the case of machines working with chemicals product (e.g. acids) pay the greatest attention to the most appropriate choice of liquid
to do this operation properly and safely, and also preserve the integrity of the machinery.
File: UT-4336 – Rev.0 Copyright © - OBL Metering pumps - All rights reserved
X9 Series metering pumps
GB
Page 37