Description; Flowsorb Iii 2310 - Micromeritics FlowSorb III 2305 Operator's Manual

FlowSorb III

Description

The FlowSorb III is available in two models: the FlowSorb III 2305 and the
FlowSorb III 2310. The FlowSorb III provides single-point and multipoint analy-
ses, as well as the capability of reporting desorption isotherms. Adsorption iso-
therms can also be reported if using the FlowSorb 2305. Samples from 0.01 m
to greater than 1,000 m
ter than 0.5%. Both models are shown in the following sections with the differing
features called out. All other features are the same on both models.

FlowSorb III 2310

The FlowSorb III 2310 allows you to measure surface area from desorption meas-
urements. This model is automatic and requires no operator intervention after the
Dewar is placed on the Dewar tray and the Start push button is depressed. The
Dewar rises automatically about the sample and analysis begins. After adsorption
is completed, the Dewar lowers and a fan turns on to warm the sample to room
temperature, allowing desorption to proceed to completion.
Mar 2012
2
/g are easily accommodated with a reproducibility of bet-
Description
2
/g
Start and Reset
Buttons
A fan is included for
warming the sample to
room temperature (con-
cealed in this illustra-
tion by the Dewar)
Track for Automatic
Elevator
1-5