FlowPrep 060
Description
The FlowPrep 060 Degasser prepares samples for adsorption analysis. It uses flowing gas
passed over a heated sample to remove moisture and other contaminants. The degasser has six
heating stations for degassing samples and six cooling stations. The desired degassing temper-
ature is easily set on the temperature controller pad located on the front of the instrument. Gas
flow control valves are readily accessible and provide a constant indication of the valve state.
May 2010
1. GENERAL INFORMATION
Figure 1-1. FlowPrep 060 Degasser
Description
1-1
Need help?
Do you have a question about the FlowPrep 060 and is the answer not in the manual?