Specifications - Micromeritics FlowSorb III 2305 Operator's Manual

FlowSorb III

Specifications

The FlowSorb III has been designed and tested to meet the specifications pro-
vided below.
Surface Area
Minimum
Maximum
Specific Surface Area
Minimum:
Maximum:
Sample Tube Volume:
Throughput:
Single Point:
Multipoint:
Degassing Temperature:
Low Specific Surfaces:
Moderate and High
Specific Surfaces:
Voltage:
Operating
Current:
Frequency:
Mar 2012
Feature
————— SAMPLE PARAMETERS —————
————— ACCURACY/REPRODUCIBILITY —————
————— ELECTRICAL —————
Specification
2
0.1 m
2
280 m
2
Approximately 0.01 m
Limited only by weighing accuracy of smallest
sample
3
1 cm , standard; other sizes available
Typically 5 per hour
Typically 1/2 per hour
35-350 °C
Typically better than ± 3% (single point
method) and ± 2% (multipoint method), both
within ± 0.5% reproducibility
Typically better than ± 2% (single point
method) and ± 1.5% (multipoint method),
both within ± 0.5% reproducibility
100, 120, 220 or 240 VAC ± 10%
1.25 A (100/120 VAC)
0.75 A (220/240 VAC)
50/60 Hz
Specifications
/g
1-15