Design - Nibe BA-ST 9022 - FE Installation & Operating Manual

2 Design

Vertical storage tanks with of BA-ST Series are pres-
sure equipment, i.e. the pressure within the storage
tanks are equivalent to the pressures in the corre-
sponding systems.
INFORMATION
All products are ready for the installation of
a heating unit containing an electric heater
with thermostat and thermal switch.
Fig. 2 Section of the BA-ST 9022-9050-FE storage
tanks.
FR1 Protective magnesium anode
UL1 Adjustable foot
XL54 Thermometer
XL35 Connector pipe for mounting electric
heating unit
QQ1 Inspection opening
XL4 Hot water intake connector pipe
BA-ST 9022-9100-FE
Storage tank is made of high quality steel. Storage
tank is allowed to work in water installations with a
maximum pressure of 10 bar (BA-ST 9022-FE up to 6
bar). Storage tanks are equipped with all the neces-
sary connections: for hot and cold water, connections
for the circulation, an adapter for mounting an electri-
cal heating unit, thermometer and temperature sensor
cover. All storage tanks have an inspection opening.
Thermal insulation of the tank is a specially selected
insulation that provides excellent thermal insulation
properties of all devices. Storage tanks have aesthet-
ic plastic housing, a temperature indicator, inspection
opening and connectors for mounting electric heating
unit and connecting the hot water circulation.
FR1
XL54
XL35
QQ1
UL1
Fig. 3 Side view of the BA-ST 9022-9050-FE storage
XL8
XL5
UA1-2 Temperature sensor cover
XL9
XL3
tanks.
Hot water inlet connector pipe
Hot water circulation connector pipe
Cold water inlet connector pipe
Cold water supply connector pipe
XL4
XL8
XL5
UA1
UA2
XL9
XL3
Chapter 2 |
Design 5