ORLACO Camera EMOS Ethernet with Ex housing
Safety
In order to guarantee safe operation, these safety instructions
must be read before you start using this equipment.
• Do not open the enclosure. This can cause damage, short-circuiting
or electrical shocks.
• Do not expose the equipment to extreme temperatures. This can
cause deformation of the enclosure or damage to internal
components.
• Repairs may only be undertaken by the manufacturer.
• The equipment must be assembled as shown in this manual.
Before you start using this equipment, please read this manual carefully
and follow all instructions. We recommend that you keep this manual in a
safe place for reference purposes.
If you have any questions or issues concerning the operation of this equi-
pment, consult the relevant section in the manual or contact the Orlaco
Products BV Service department.
The camera/display systems from Orlaco comply with the latest CE, ADR,
EMC and mirror-directive regulations. All products are manufactured in
accordance with the ISO 9001 quality management, ISO/TS16949 quality
automotive and ISO 14001 environmental management.
Contents
Release Notes
A 01. New edition, July 2018.
Available Documentation
Data sheet: DS0964250
2
Installation Manual
Camera EMOS Ethernet
page
3
4
4
5
5
5
6
11
14
Ex enclosure for Camera EMOS Ethernet
IM0973660 A 01
Need help?
Do you have a question about the Camera EMOS Ethernet with Ex housing and is the answer not in the manual?