Advertisement
Hannah Bed Queen Size
PRE-ASSEMBLY:
•
Please read all instructions before starting to assemble.
•
Two-person is recommended during assembly.
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
PARTS INCLUDED:
A – Headboard – 1 pc
D – Siderail – 2 pcs
HARDWARE INCLUDED:
G – Phillips Head Screw – 14 pcs
TOOLS REQUIRED (but not included:
•
Phillips head screwdriver
B – Footboard – 1 pc
E – Slat Rolls – 1 pc
www.pbteen.com
C – Leg – 4 pcs
F – Support Leg– 3 pcs
1 of 3
Advertisement
Table of Contents
Related Manuals for PB TEEN Hannah Bed Queen
Summary of Contents for PB TEEN Hannah Bed Queen
- Page 1 Hannah Bed Queen Size PRE-ASSEMBLY: • Please read all instructions before starting to assemble. • Two-person is recommended during assembly. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. PARTS INCLUDED: A – Headboard – 1 pc B –...
- Page 2 ASSEMBLY: 1. Attach Leg (C) to the Posts of Headboard (A) and/or Footboard (B) by inserting exposed bolt at the top of Leg (C) into the bottom of Posts and turning legs to tighten, as shown below. Repeat leg assembly for other Posts. 2.
- Page 3 5. Thread the Support Legs (F) with levelers into the pre-drilled holes on the bottom of the slat on Slats Roll (E). NOTE: Three positions for the support legs on Slats Roll (E) are provided. The center positions of each slat are for bed use without trundle.
Need help?
Do you have a question about the Hannah Bed Queen and is the answer not in the manual?
Questions and answers