PB TEEN HAMPTON CLASSIC DESK HUTCH Assembly Instructions

Advertisement

HAMPTON CLASSIC DESK HUTCH
ASSEMBLY INSTRUCTION
Date: 2013-Oct.-01
Rev:
www.pbteen.com
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAMPTON CLASSIC DESK HUTCH and is the answer not in the manual?

Questions and answers

Summary of Contents for PB TEEN HAMPTON CLASSIC DESK HUTCH

  • Page 1 HAMPTON CLASSIC DESK HUTCH ASSEMBLY INSTRUCTION Date: 2013-Oct.-01 Rev: www.pbteen.com Page 1 of 3...
  • Page 2 Important safety instructions: • Please read all all instruction carefully before assembling this Hutch. • For your safety, assembly by two or more adults is strongly recommended. • Keep these instructions for future use. • Use only vendor-supplied hardware to assembly this item. Using unauthorized hardware could jeopardize the structural integrity of the item.
  • Page 3 Assembly Instruction Steps: 1. Place the desk hutch on desk (sold separately) in an upright position, as shown below. 2. Allign pre-drilled holes of the Mending Plate (A) with the pre-drilled holes at the back of Desk and Hutch. Insert the Phillips Head Screw (B) through the pre-drilled holes of the Mending Plate (A) into pre-drilled holes at the back of Desk and Hutch then loosely tighten Philips Head Screw (B) with a Philips Head Screwdriver.

Table of Contents