Page 1
IP mask byte 1 000-255 IP mask byte 2 000-255 Ethernet Interface Custom IP Mask IP mask byte 3 000-255 IP mask byte 4 000-255 Universe 000-255 Start Channel 001-512 Ethernet to DMX No / Yes Axcor Spot 300 – User Menu...
Page 2
Load preset 2 Are you sure ? User Preset 2 Save to preset 2 Yes / No Load preset 3 Are you sure ? User Preset 3 Save to preset 3 Yes / No Axcor Spot 300 – User Menu...
Page 3
Gobo Are you sure ? Upload Firmware Transfer …….. Yes / No Calibration Channels 000 - 255 Access Code 1234 DVANCED Menu Locking Unlock Code XXXX Are you sure ? Recover Yes / No Axcor Spot 300 – User Menu...
DMX signal to all the connected projectors. protocollo Ethernet tramite segnale DMX a tutti i proiettori connessi. • • NO: DMX transmission disabled. NO: Trasmissione DMX disabilitata. • • YES: DMX transmission enabled. YES: Trasmissione DMX abilitata. Axcor Spot 300 – User Menu...
Reset (without a DMX input signal), selecting one ingresso), selezionare tra le 7 disponibili: from the 7 available positions: • • • • 12.5% 12.5% • • • • • • • • 87.5% 87.5% • • 100% 100% Axcor Spot 300 – User Menu...
Page 6
Permette di attivare (ON) la riduzione della luminosità del about 30 seconds in idle status. Select OFF to turn off or display trascorso un tempo di circa 30 secondi in stato di disable this option. riposo. Selezionare OFF per disabilitare questa opzione. Axcor Spot 300 – User Menu...
Page 7
Premendo contemporaneamente il tasto/freccia DX e il the "main menu” to quickly restore default values tasto/freccia SX una volta entrati nel ''menu principale'' (DEFAULT PRESET). è possibile ripristinare i valori di default (DEFAULT PRESET) in modo rapido. Axcor Spot 300 – User Menu...
It lets you view the percentage of each fan installed in the installata nel proiettore: projector: • Base Fan (ventola per raffreddamento Base) • Base Fan (Base cooling fan) • Led Fan (ventola raffreddamento LED) • Led Fan (LED cooling fan) Axcor Spot 300 – User Menu...
It lets you test the correct operations of effects using pre- Permette di verificare il corretto funzionamento degli effetti saved Tests: attivando Test memorizzati: • • Pan/Tilt Pan/Tilt • • Colour Colour • • Beam Beam • • Gobo Gobo • • Axcor Spot 300 – User Menu...
Fare riferimento al update process of the fixture. Please refer to the “Recover documento “Recover function” dettagli della function” tech document for the detail of the procedure. procedura. Axcor Spot 300 – User Menu...
Need help?
Do you have a question about the Axcor Spot 300 and is the answer not in the manual?
Questions and answers