Checking The Brake Lining - Verlinde STAGEMAKER SL10 1004 M2 A D8+ Manual

Tabla 2. Wear dimensions of the rotating suspension hook
Hook type
RSN020-T
RSN05-V
Figura 17. Measuring wear on the suspension bracket (option)
Tabla 3. Wear dimensions of the suspension bracket (option)
Frame size
05
10
7.4.2

Checking the brake lining

1. If a load is attached to the hook, remove the load.
2. Disconnect the chain hoist from the main power supply network.
3. Remove the end cover on the brake side.
For more information, see chapter Removing and installing the hoist covers.
4. Check the main brake.
To check the brake lining of the main brake, locate the brake check hole in the brake
assembly.
Este documento y la información contenida en éste son de propiedad exclusiva de Verlinde S.A.S., constituyen un
secreto comercial no público, confidencial del propietario, y no puede ser ni reproducido, divulgado a terceros,
modificado ni empleado de ninguna otra manera sin el permiso expreso escrito de Verlinde S.A.S. Copyright 2020 ©
Verlinde S.A.S. Todos los derechos reservados.
Nominal DIM W Nominal DIM X
22
31
W
Short [DIM mm]
Nominal DIM Min. DIM W
21.50
-
MANUAL DEL PROPIETARIO
Dimensions [mm]
Min. DIM W
27 20.9
34 29.5
Bracket type
Long [DIM mm]
Nominal DIM
19.00 21.50
- 26.00
Max. DIM X
29.7
37.4
Min. DIM W
19.00
23.00
3/2020