Ingersoll-Rand BP10P3 Operation And Maintenance Manual

OPERATION AND MAINTENANCE MANUAL FOR
BATTERY POWERED IMPULSE WRENCHES
Models BP10P3 and BP10PQ1 Battery Powered Impulse Wrenches are designed for use
in assembly operations when a permanent power source is impractical. They are
ideally suited to appliance assembly.
Ingersoll–Rand is not responsible for customer modification of tools for applications on
which Ingersoll–Rand was not consulted.
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ ALL THESE INSTRUCTIONS BEFORE PLACING TOOL IN SERVICE OR
OPERATING THIS TOOL AND SAVE THESE INSTRUCTIONS.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION
IN THIS MANUAL INTO THE HANDS OF THE OPERATOR.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL
PLACING THE TOOL IN SERVICE
•
Do not remove any labels. Replace any damaged
label.
USING THE TOOL
•
Always wear eye protection when operating or
performing maintenance on this tool.
•
Power tools can vibrate in use. Vibration,
repetitive motions, or uncomfortable positions
may be harmful to your hands and arms. Stop
using any tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before resuming
use.
The use of other than genuine Ingersoll–Rand replacement parts may result in personal injury, decreased tool perfor-
mance and increased maintenance, and may invalidate all warranties.
Have your tool repaired by a qualified person. This electric tool is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in consider-
able danger to the user.
Repairs should be made only by authorized, trained personnel. Consult your nearest Ingersoll–Rand Authorized
Servicenter.
Refer All Communications to the Nearest
Ingersoll–Rand Office or Distributor.
 Ingersoll–Rand Company 2000
Printed in Japan
MODELS BP10P3 AND BP10PQ1
INJURY, INCLUDING THE FOLLOWING.
03542370
•
Guard against electric shock. Prevent body contact
with earthed or grounded surfaces. For example;
pipes, radiators, ranges, refrigerator enclosures.
•
Keep work area clean. Cluttered areas and benches
invite injuries.
•
Consider work area environment. Don't expose
power tools and chargers to water. Keep work area
well lighted. Do not use tool in explosive or flam-
mable atmospheres.
•
Keep bystanders and children away. Do not permit
unauthorized personnel to operate this tool, or touch
tool or battery.
Form P7311
Edition 5
June, 2000