Daiichi Electronics SMLC-110L Instruction Manual page 35

(3) 231 to 232 External operation input setting 【With an external operation input option】
Various setting of external operation input is performed.
231
External operation
input 1 function
◆ 231 External operation input 1 function,
232 External operation input 2 function
The function of each external operation input
(alarm reset, maximum / minimum reset,
measurement factor change, phase change) can
be selected.
Selection by ＋ and － , set value is
updated by SET .
Default setting (With an alarm output option)
Alarm reset (External operation input 1)
Maximum / minimum reset (External operation input 2)
Default setting (With no alarm output option)
Maximum / minimum reset (External operation input 1)
Measurement factor change (External operation input 2)
＋
ALARM RESET:
Alarm reset
－
・About the setting display in an external operation input function
Function
Alarm reset
Maximum /
Minimum reset
Measurement
factor change
Phase change
232
RESET/
External operation
SHIFT
input 2 function
RESET/
SHIFT
MAX./MIN. RESET：
Maximum / minimum reset
The contents of a display at the case of function setting
"ALARM" and "RESET" are displayed by turns by 7
segment displays of the main monitor.
"RESET" is displayed by 7 segment displays of the
main monitor. And, "MAX <最大>" and "MIN <最小>"
display by turns.
"DISP" is displayed by 7 segment displays of the main
monitor. And, each measurement factor (units of V,
Hz, etc.) displays by turns.
"DISP" is displayed by 7 segment displays of the main
monitor. And, each phase (R, S, T, N) displays by
turns.
Setting factor New setting
Setting No. Current setting
＋
Measurement factor DISP：
Measurement factor change
－
－
＋
34
ALARM and RESET are
displayed by turns.
(Alarm reset)
Measurement factors (V,
Hz, etc.) and DISP are
displayed by turns.
(Measurement factor
change)
＋
R,S,T DISP：
Phase change
－
"Current setting" "New setting"
display point display point
Sub-monitor
Main monitor
(right)
SMLC-213-154