Daiichi Electronics SMLC-110L Instruction Manual page 25

(3) Setting of frequency measurement range
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET and RESET/SHIFT together for longer than 3 seconds
Setting of
measurement range
in frequency.
(212)
(213)
Selected measuring range is entered
(4) Setting of analog output.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Setting of output
Press SET and RESET/SHIFT together for longer than 3 seconds
cut function at the
case in minute input
Press RESET/SHIFT
(3-phase voltage is
0.5％ or less,
zero-phase voltage
(225A)
is 1.0％ or less).
Selected action is entered
(225A)
(5) Setting of alarm output.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET for longer than 3 seconds
Setting of return
method in alarm
Select a return method by ＋ and －
output 1.
(122AL)
Selected return method is entered
Press SET for longer than 3 seconds
Setting of return
Press RESET/SHIFT
method in alarm
output 2.
Select a return method by ＋ and －
(125AL)
Selected return method is entered
(6) Setting of 3-phase voltage detection.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET for longer than 3 seconds
Setting of upper
limit alarm value in
Select a upper limit alarm value by ＋ and －
3-phase voltage.
(131H)
Selected upper limit alarm value is entered
Press SET for longer than 3 seconds
Setting of lower
limit alarm value in
Press RESET/SHIFT
3-phase voltage.
(132L)
Selected lower limit alarm value is entered
Press SET for longer than 3 seconds
Setting of Time
interval in a line
Press RESET/SHIFT
voltage.
(133)
Press SET
Setting and operation procedures
Press RESET/SHIFT Select a measuring range by ＋ and －
(213)
Setting and operation procedures
Press RESET/SHIFT
(222A)
Select a low Input cut ON/OFF by ＋ and －
Setting and operation procedures
Press RESET/SHIFT
(123AL)
Setting and operation procedures
Select a lower limit alarm value by ＋ and －
(132L)
Press RESET/SHIFT
(132L)
Selected Time interval is entered
Press DISPLAY
Press RESET/SHIFT
(223A)
Press SET
Press DISPLAY Returns to display mode.
Press MODE
(111) (121AL)
Press SET
Press DISPLAY
Press MODE
(111) (121AL)
Press RESET/SHIFT
(124AL)
Press SET
Press DISPLAY
Press MODE
(111) (121AL)
Press SET
Press DISPLAY
Press MODE
(111) (121AL)
Press DISPLAY
Press MODE
(111) (121AL)
Select a Time interval by ＋ and －
(133)
Press DISPLAY
24
Press RESET/SHIFT
(211)
Press SET
Returns to display mode.
Press MODE
(211) (221A)
Press RESET/SHIFT
(224A)
Press RESET/SHIFT
(122AL)
Returns to display mode.
Press RESET/SHIFT
(122AL)
(125AL)
Returns to display mode.
Press MODE
(131H)
Returns to display mode.
Press MODE
(131H)
Press SET
Returns to display mode.
Press MODE
(131H)
Returns to
display mode.
SMLC-213-154
Page
32
Page
33
Page
28
28
Page
29
29
29