Table of Contents
Advertisement
(5) 151 to 152 Backlight setting
It sets action and brightness of backlight.
151
Backlight action
◆ 151 Backlight action
The backlight operation can be selected from ON (always on), AUTO (auto
off), and OFF (always off).
If 5 minutes elapses without operating a switch in case it is set as
"AUTO (auto off)", backlight will go out automatically.
After that, backlight will be turned on if either of switches is operated.
Selection by ＋ and － , set value is updated by SET .
Default setting：AUTO (Auto off)
AUTO：
Auto off
◆ 152 Backlight brightness
The backlight brightness can be selected in 5 levels.
Backlight becomes the darkest if it is set as "1".
Backlight becomes the brightest if it is set as "5".
Selection by ＋ and － , set value is updated by SET .
Default setting：3 (Middle)
5.3.2 Setting mode 2
Display mode
(Measurement
display)
Setting mode 2 is selected by pressing SET and RESET/SHIFT switches continuously for longer than 3 seconds.
Pushing MODE switch performs movement of setting item.
The present mode can be returned to the display mode by pressing DISPLAY switch.
< Caution >
If setting change should have been mistaken, a display and output of measurement are not obtained correctly.
Therefore, users must not set. The setting item without the corresponding option is not displayed.
RESET/
SHIFT
Backlight brightness
＋
OFF：
Always
off
－
－
＋
SET and
RESET/SHIFT
3 seconds
211 to 213
DISPLAY
Measurement range setting
221A to 225A
DISPLAY
Analog output setting
231 to 232
DISPLAY
External operation input setting
241 to 244
DISPLAY
Measurement ON/OFF setting
DISPLAY
Initialization of setting value.
152
RESET/
SHIFT
＋
ON：
Always
on
－
MODE
MODE
MODE
MODE
251
MODE
31
Current setting
New setting
Setting No
Setting factor
Backlight
Setting
Brightness
5
4
3
2
1
Setting mode 2
SMLC-213-154
Bright
Dark
Advertisement
Table of Contents
