Daiichi Electronics SMLC-110L Instruction Manual page 26

(7) Setting of zero-phase voltage detection.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET for longer than 3 seconds
Setting of upper
limit alarm value in
zero-phase voltage.
(141H)
(141H)
Selected upper limit alarm value is entered
Press SET for longer than 3 seconds
Setting of
measurement response
time in zero-phase
voltage.
(141H)
(142)
Selected response time is entered
Press SET for longer than 3 seconds
Setting of automatic
change ON/OFF to
ground fault phase
detection display.
(141H)
(143)
Press SET
(8) Backlight setting
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET for longer than 3 seconds
Setting of action
in backlight.
(151)
(141H)
Selected backlight action is entered
Press SET for longer than 3 seconds
Setting of
brightness in
(141H)
backlight.
Press SET
(152)
Returns to display mode.
(9) Other, measurement setting
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET and RESET/SHIFT together for longer than 3 seconds
Setting of dead band
in measurement
Select a dead band value of measurement by ＋ and －
display.
(321)
The dead band value of display is entered
Setting and operation procedures
Select a upper limit alarm value by ＋ and －
Press RESET/SHIFT Select a response time by ＋ and －
(142)
Press RESET/SHIFT Press RESET/SHIFT
(142)
Selected function is entered
Setting and operation procedures
Press MODE Select a backlight action by ＋ and －
(151)
Press MODE Press RESET/SHIFT
(151)
Selected backlight brightness is entered
Setting and operation procedures
Press MODE Press MODE
(111) (121AL)
Press SET
Press DISPLAY
Press MODE Press MODE
(111) (121AL)
Press DISPLAY Returns to display mode.
Press MODE Press MODE
(111) (121AL)
Select a function by ＋ and －
(143)
Press DISPLAY
Press MODE Press MODE
(111) (121AL)
Press DISPLAY Returns to display mode.
Press MODE Press MODE
(111) (121AL)
Select a brightness by ＋ and －
(152)
Press SET
Press DISPLAY
25
Press MODE
(131H)
Returns to display mode
Press MODE
(131H)
Press SET
Press MODE
(131H)
Returns to display mode
Press MODE
(131H)
Press SET
Press MODE
(131H)
Press DISPLAY
Press MODE
(311) (321)
Returns to display mode
SMLC-213-154
Page
30
30
30
Page
31
31
Page
37