Table of Contents
Advertisement
not intended to create or refer to any partnership relationship with any other company. Arm may make changes to this document at
any time and without notice.
If any of the provisions contained in these terms conflict with any of the provisions of any click through or signed written
agreement covering this document with Arm, then the click through or signed written agreement prevails over and supersedes the
conflicting provisions of these terms. This document may be translated into other languages for convenience, and you agree that if
there is any conflict between the English version of this document and any translation, the terms of the English version of the
Agreement shall prevail.
The Arm corporate logo and words marked with
subsidiaries) in the US and/or elsewhere. All rights reserved. Other brands and names mentioned in this document may be the
trademarks of their respective owners. Please follow Arm's trademark usage guidelines at
trademarks.
Copyright © 2010–2012, 2015, 2017, 2018 Arm Limited (or its affiliates). All rights reserved.
Arm Limited. Company 02557590 registered in England.
110 Fulbourn Road, Cambridge, England CB1 9NJ.
LES-PRE-20349
Confidentiality Status
This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in
accordance with the terms of the agreement entered into by Arm and the party that Arm delivered this document to.
Unrestricted Access is an Arm internal classification.
Product Status
The information in this document is Final, that is for a developed product.
Web Address
http://www.arm.com
Conformance Notices
This section contains conformance notices.
Federal Communications Commission Notice
This device is test equipment and consequently is exempt from part 15 of the FCC Rules under section 15.103 (c).
Class A
Important: This is a Class A device. In residential areas, this device may cause radio interference. The user should take the
necessary precautions, if appropriate.
CE Declaration of Conformity
The system should be powered down when not in use.
It is recommended that ESD precautions be taken when handling DSTREAM equipment.
The DSTREAM modules generate, use, and can radiate radio frequency energy and may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful
interference to radio reception, which can be determined by turning the equipment off or on, you are encouraged to try to correct
the interference by one or more of the following measures:
•
Ensure attached cables do not lie across the target board.
•
Increase the distance between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult Arm
It is recommended that wherever possible shielded interface cables be used.
100955_0529_00_en
Support for help.
®
Note
Copyright © 2010–2012, 2015, 2017, 2018 Arm Limited or its
affiliates. All rights reserved.
Non-Confidential
®
or ™ are registered trademarks or trademarks of Arm Limited (or its
Arm
http://www.arm.com/company/policies/
DS-5
®
3
Advertisement
Table of Contents
