ARM DSTREAM DS-5 User Manual page 27

2 System requirements for using Arm DSTREAM
2.2 Connecting the DSTREAM unit
4. Configure the IP address on a debug hardware unit using the installed ConfigIP utility. This enables
you to access your unit by Ethernet. (You do not have to do this if you are using a USB connection).
Related concepts
1.5 The DSTREAM probe on page 1-16
2.1 Requirements for connecting the DSTREAM unit on page 2-25
2.3 About hot-plugging and unplugging the debug cable on page 2-28
2.4 About tracing with DSTREAM on page 2-29
Related tasks
2.5 Tracing with DSTREAM on page 2-30
100955_0529_00_en Copyright © 2010–2012, 2015, 2017, 2018 Arm Limited or its 2-27
affiliates. All rights reserved.
Non-Confidential