Table of Contents
Advertisement
1.6
Installing the USB drivers for the DSTREAM unit
To use the DSTREAM unit with a USB connection, the USB device drivers provided with Arm DS-5
must be installed for your operating system.
The drivers for DSTREAM are optionally installed as part of the install process for DS-5. If you have
skipped the driver install process in DS-5, follow these steps to install them.
Procedure
•
On Windows:
1. Using administrative privileges, run the
DS-5_install_directory\sw\driver_files
2. In the DS-5 Driver Installation Wizard, click Next and follow the steps.
During installation, you might receive warnings such as Windows can't verify the publisher of
this driver software. You can safely ignore these warnings and continue with the installation.
3. After the drivers are installed, click Finish.
•
On Linux:
1. Using root privileges, run the
the DS-5 install directory. The
your workstation.
2. Enter
The USB drivers are now installed on your workstation.
100955_0529_00_en
Note
run_post_install_for_ARM_DS-5_vx.x.sh
x.x
to confirm the installation.
yes
Copyright © 2010–2012, 2015, 2017, 2018 Arm Limited or its
affiliates. All rights reserved.
Non-Confidential
1.6 Installing the USB drivers for the DSTREAM unit
driver_install.bat
directory.
in the filename denotes the DS-5 version that is installed on
1 Introduction to Arm DSTREAM
batch file available in
script file available in
1-18
Advertisement
Table of Contents
