Tracing With Dstream - ARM DSTREAM DS-5 User Manual

2.5

Tracing with DSTREAM

You can capture trace with your DSTREAM unit and a supported debugger.
Procedure
1. Connect your DSTREAM unit using Ethernet or USB.
When you have connected DSTREAM to your host computer, you are ready to begin using
DSTREAM with your debugger.
2. See the documentation that accompanies your debugger for information on using DSTREAM to
capture trace.
Related concepts
1.4 The DSTREAM unit on page 1-13
2.1 Requirements for connecting the DSTREAM unit on page 2-25
2.3 About hot-plugging and unplugging the debug cable on page 2-28
2.4 About tracing with DSTREAM on page 2-29
Related tasks
2.2 Connecting the DSTREAM unit on page 2-26
Related information
Using the Debugger
Debugger Command Reference
100955_0529_00_en Copyright © 2010–2012, 2015, 2017, 2018 Arm Limited or its
affiliates. All rights reserved.
Non-Confidential
2 System requirements for using Arm DSTREAM
2.5 Tracing with DSTREAM
2-30