Requirements For Connecting The Dstream Unit - ARM DSTREAM DS-5 User Manual

2.1

Requirements for connecting the DSTREAM unit

The parts you require depend on what you are connecting to the DSTREAM unit.
You require the following parts to connect the DSTREAM unit between your workstation and the target
hardware:
• The DSTREAM unit.
• The external power adapter for the DSTREAM unit.
• The mains cable for the external power adapter that is appropriate for your region.
• One of the following cables, to connect the DSTREAM unit to the PC or the network:
— The USB cable, to connect the DSTREAM unit directly to the PC using the USB port.
— The RJ-45 Ethernet cable, to connect the DSTREAM unit to the network.
• One of the following cables, to connect the DSTREAM unit to the target hardware:
— The target-compatible JTAG cable.
— The Mictor cable if you want to perform trace.
You must also provide the following items:
• A host computer that conforms to the host software and hardware requirements.
• Some target hardware containing a debug interface supported by DSTREAM.
Related concepts
2.3 About hot-plugging and unplugging the debug cable on page 2-28
2.4 About tracing with DSTREAM on page 2-29
1.2 DSTREAM product contents on page 1-11
Related tasks
2.2 Connecting the DSTREAM unit on page 2-26
2.5 Tracing with DSTREAM on page 2-30
100955_0529_00_en Copyright © 2010–2012, 2015, 2017, 2018 Arm Limited or its
affiliates. All rights reserved.
Non-Confidential
2 System requirements for using Arm DSTREAM
2.1 Requirements for connecting the DSTREAM unit
2-25