Table of Contents
Advertisement
3.
Description
3.1
Construction
The wall-mounted FRANK hot water high-pressure module is a stationary,
electrically-heated machine. The machine consists of an enamelled chassis with wall
consoles, hot water tank made of stainless steel with electrical gilled pipes, high-
pressure pump with electric motor, cold water tank and a separate master control
cabinet.
On the pressure side the machine is equipped with a glycerine-dampered pressure
gauge, an overflow safety valve, a flow monitor switch, a pressure switch and a
pressure accumulator.
The construction and dimensions are shown in the basic circuit diagram.
- 3 -
Advertisement
Table of Contents
