Frank FEM 718 MSE-Z Operating Instructions Manual page 14

Table of Contents

Advertisement

Formulation concentration 1:10
Dosing valve position
If higher concentrations are required, the formulation of the cleaning agent has to
be increased.
The maximum suction height for the cleaning agent is 1 m. The suction baskets must
be located below the cleaning agent level in the tank.
The desired cleaning agent A or B can be selected on the button of the control box at
the washing site.
A T T E N T I O N!
When the cleaning agent tank is empty, shut the corresponding dosing valve. Do not
select the program with the empty tank, as air will be sucted which can damage the
pump.
5.7.3
Starting the machine, program selection
Set main and emergency switch to "1".
Start machine by actuating the START button switch on the control cabinet
at the washing site.
A T T E N T I O N !
Machine starts with spray gun closed and switches off immediately.
Select program – see section 5.5
1
2
3
4
5
6
7
8
9
10
- 13 -
(1 part cleaning agent, 10 parts water)
Percentage of final concentration of the
cleaning agent in the water jet
0,09
0,39
0,51
0,52
0,55
0,58
0,63
0,66
0,67

Advertisement

Table of Contents
loading

Table of Contents