Introduction; Warnings; Guarantee / Eu Declaration Of Conformity - CHERUBINI Skipper LCD Instructions Manual

Congratulations for choosing a Cherubini Skipper LCD remote control!
The wide 1.8" LCD colour display and the simple and intuitive navigation system make
it possible to adapt the opening and closing of blinds and awnings at home and in the
office to your requirements.
This instruction manual will explain the following:
- which operations are necessary when you switch your remote control on for the first
time (PRELIMINARY OPERATIONS)
- how to change the basic settings of the remote control: language, time/day, display,
radio controls (SETTINGS)
- how to program the movements of the motors controlling awnings and blinds according
to daily and weekly schemes (PROGRAMMING)
- how to use the remote control every day after the initial programming (COMMANDS).
Also the LEGENDS (in the initial pages), the GLOSSARY and the MAP of CONTENTS,
which you will find at the end, will be useful means to learn to use your remote control.
In case of problems, contact your installer.
WARNING!! Before setting the first time
read the instructions for the motor and/or the receiver.
Keep remote controls away from children.
Children should be supervised to ensure that they do not play with appliance.
GUARANTEE
Failure to comply with these instructions annuls CHERUBINI's responsibilities and
guarantee.
EU DECLARATION OF CONFORMITY
CHERUBINI S.p.A. declares that the product is in conformity with the relevant Union
harmonisation legislation: Directive 2014/53/EU, Directive 2011/65/EU.
The full text of the EU declaration of conformity is available upon request at the
following website: www.cherubini.it.

INTRODUCTION

WARNINGS

23