CHERUBINI Skipper LCD Instructions Manual page 11

PROCEDURE 1
To execute the ADD FROM function
1- Already stored remote control:
a. Position yourself on the desired
channel and carry out the
following sequence:
2- Skipper LCD to be stored:
a. Main menu / Programming / Devices / DEVICE CREATED / Add from + STORE
b. After storing, check if the motor operates correctly using the UP / DOWN / STOP
keys.
3- After checking, press END PROCEDURE on Skipper LCD.
PROCEDURE 2 To execute the ADD TO function
1- Already stored Skipper LCD:
a. Main menu / Programming / Devices / DEVICE CREATED / Add to + STORE.
b. Wait for the movements of the motor, which will confirm that it is working correctly.
2- Remote control/Domi to be stored:
a. Position yourself on the desired
channel and carry out the following
sequence.
For Domi device: click icon
b. After storing, check if the motor operates correctly using the UP / DOWN / STOP
keys.
3- After checking, press END PROCEDURE on Skipper LCD.
PROCEDURE 3
To execute the functions ADD TO / FROM on two Skipper LCD remote
controls
1- Already stored Skipper LCD:
a. Main menu / Programming / Devices / DEVICE CREATED / Add to + STORE.
b. Wait for the movements of the motor, which will confirm that it is working correctly.
2- Skipper LCD to be stored:
a. Main menu / Programming / Devices / DEVICE CREATED / Add from + STORE.
b. After storing, check if the motor operates correctly using the UP / DOWN / STOP
keys.
3- After checking, press END PROCEDURE on both remote controls.
A B
B
2sec
.
30
B