Groups; Scenario - CHERUBINI Skipper LCD Instructions Manual

HOW TO INSERT A DEVICE INTO AN ALREADY EXISTING GROUP:
Main menu / Programming / Devices / CREATED DEVICE / Groups
All groups into which the device can be inserted are shown (groups of the same type
as the device). The groups into which the device has already been inserted are shown
as already selected.
In order to modify selections, press the UP/DOWN keys + the SELECTION key.
Press SAVE to save changes.
The other items of the Modify Device menu are as follows:
- Modify: to change a device name or to change type.
- Delete: to delete a device.

GROUPS

How to create a new group:
Main menu / Programming / Groups / NEW
- "Name" to customize the group name (max. 16 characters). Create the required
name using the keyboard (see page 24). To quit: ENTER.
- "Type" to classify the group (blind, awning, etc.). After selecting, the system
automatically goes back to the "NEW GROUP" screen. To quit: "BACK".
To save the created group: SAVE.
How to link devices with a certain group:
Main menu / Programming / Groups / CREATED GROUP / Devices
Only the devices of the same type as the group are shown. Select the devices you wish to
link with the group (UP/DOWN + SELECT) and save: SAVE.
The other items of the Modify Group menu are as follows:
- Modify: to change a group name or to change type.
- Delete: to delete a group.

SCENARIO

How to create a new scenario:
Main menu / Programming / Scenarios / NEW
- "Name" to customize the name of the scenario (max. 16 characters). Create the name
you require using the keyboard (see page 24). To quit: ENTER.
To save the scenario: SAVE.
How to associate a group with a scenario:
Main menu / Programming / Scenarios / CREATED SCENARIO / Group commands
The list of existing groups is shown. Select the desired group or groups and link it with the
required action. After selection, the system automatically goes back to the last screen. To
go back to the list of groups: BACK.
33