To Run The Bios Automation Script On Hp Z4 G4 Workstation - Honeywell Z4 G4 Planning, Installation And Service Manual

Chapter 4 - Operation
3. Browse to the folder and run the files one by one.
4. Follow the on screen instruction to install the drivers.
4.3.4

To run the BIOS automation script on HP Z4 G4 workstation

1. Log on to system using an account with Administrator privileges.
2. Go to HP-Z4G4-Win10-Drivers/HP-Z4G4-Win7-x64-Drivers and extract the BCU.zip.
3. Click Start > Windows System > Command Prompt, right-click Run as adminstrator, browse to
BCU folder.
4. Run BIOSCONFIGUTILITY64.EXE/ set:Z4G4CISSETTINGS .
5. Close the command prompt and restart the system.
- 51 -