Chapter 3 - Installing; Installation Tasks; Power And Grounding Requirements - Honeywell Z4 G4 Planning, Installation And Service Manual

CHAPTER
3

Installation tasks

l

Power and grounding requirements

l
Installing workstation in Icon Series console
l
Installing workstation in the Experion Orion Console
l
Installing workstation in Classic console
l
Connecting cables
l
Connecting to the Experion Orion console monitor
l
Connecting adapters
l
Connecting touchscreen adapter cable
l
Remote Peripheral Solution
l
3.1 Installation tasks
The specific tasks you need to perform vary depending upon the type of furniture in which you are
installing the workstation. The following table lists the major platform installation tasks.
Task
Be aware of all power and grounding
requirements for your furniture.
Verify pinning for external media drives is
correct
Install the workstation in the furniture
Connect device cables
3.2 Power and grounding requirements
The ground connection for Workstation-based nodes is made through the third wire in the AC power
I
NSTALLING
For more information refer to...
Specific site requirements
Section Power and grounding
requirements
Section Pinning media devices
Section Installing workstation in
Icon Series console
Section Installing workstation in Z
and EZ Console
Section Installing workstation in
Cabinets
Section Connecting cables
- 27 -