VERDER HI-CLEAN VA-2H40 Repair Parts page 12

Repair
Check Valve Valve Repair Repair
Check Check Valve Repair
NOTE: NOTE: Kits are available for new check valve NOTE:
flappers, or check valve balls in a range of materials.
Gasket kits also are available.
Disassemble Disassemble Ball Disassemble Ball Ball Check Check Valves Check
1. Follow the Pressure Relief Procedure, page 9
Disconnect all fluid and air lines.
2. To drain the pump, pull the frame quick-release
pins (207) and rotate the pump.
NOTE: NOTE: After draining, rotate the pump to NOTE:
positions which will aid disassembly.
3. Remove the clamps (23) on the outlet manifold
(17) and remove the manifold.
NOTE: Use care while removing manifolds to
NOTE: NOTE:
avoid damage to check valve components.
12
Valves Valves
.
4. Remove remaining clamps (23), manifolds (17),
gaskets (18), and check valves (19).
5. Clean and inspect gaskets, balls, ball stops, and
seating surfaces for any damage and replace as
necessary.
6. To continue with diaphragm disassembly, see
Disassemble the Standard Diaphragms, page 14.
812.0064