Maintenance History - Billy Goat FM3300 Operator Owner's Manual

MAINTENANCE
17
Use only a qualifi ed mechanic for any
adjustments, disassembly or any kind
of repair .
WARNING: TO AVOID PERSONAL INJURY,
ALWAYS TURN MACHINE OFF, MAKE SURE
ALL MOVING PARTS COME TO A COM-
PLETE STOP.
Note: Blade, blade brake puck, transaxle brake, and drive belts are normal wear items. These should be
inspected on a regular basis and replaced if worn.

MAINTENANCE HISTORY

Date of Service
ADJUST ALL BELT TENSIONS AFTER FIRST 5 HRS. OF USE TO PROLONG THE LIFE OF BELTS.
Part No. 520141
Service Performed
Maintenance Schedule
Maintenance Operation
Engine (See Engine Manual)
Check for excessive vibration
Inspect for loose parts
Inspect for worn/damaged parts
Sharpen Blade
Inspect belts for wear
Replace blade and traction belts
Lubricate caster pivots and
height adjustment spacers
Lubricate pivot points of all
three control levers
Check tire pressure
NOTE: infl ate to mfr.'s specifi ca-
tion as shown on tire side-wall
Check brake puck
Check parking brake
DISCONNECT SPARK PLUG WIRE
BEFORE SERVICING UNIT.
RECONNECT SPARK PLUG WIRE,
AND ALL GUARDS BEFORE STARTING
ENGINE.
Follow these hourly maintenance
intervals.
Every 5 hrs
Every Every 25 Every 50
or (Daily)
Use hrs hrs
Page 10 of 20
Every
200-250 hrs
Form No. F061604A