AMX Precis LT User Manual page 45

Select the outputs that you want to disconnect and then press the Take Key. Any
output keys that remain illuminated are still connected.
To disconnect a single switch: (Input 4 is routed to Output 1 on the Video Level)
1. Press the Video Level Key.
The Video Level Key is the only key illuminated.
2. Press Output Key 1.
Output Key 1 blinks and Input Key 4 illuminates, indicating that a signal is
routed between them.
3. Press Input Key 4.
4. Press the Take Key.
All the illuminated keys turn off.
Output 1 is disconnected from Input 4 on the Video Level.
The panel remains in Switch mode.
To disconnect multiple switches: (Input 3 is routed to Outputs 2 and 4 on the
Audio Level)
1. Press the Audio Level Key.
The Audio Level Key is the only key illuminated.
2. Press Input Key 3.
Input Key 3 blinks and Output Keys 2 and 4 illuminate, indicating that the signal
from Input 1 is routed to each of them.
3. Press Output Keys 2 and 4.
Output Keys 2 and 4 are no longer illuminated.
4. Press the Take Key.
All the illuminated keys turn off.
Input 3 is disconnected from Outputs 2 and 4 on the Audio Level.
All other outputs receiving a signal from Input 3 are not affected.
The panel remains in Switch Mode.
Control Panel Operations 36