Page 1
GENERAL TERMS AND CONDITIONS OF CONNECTION AND WARRANTY Layer-buffer storage tanks PZRR Please pass on to the user! DEAR CUSTOMER! You have decided to use one of our buffer tanks! We thank you for your trust. You will receive an attractive device, built to the latest state of the art and which complies with the applicable regulations.
SAFETY INSTRUCTIONS General • This tank can be used by children eight years old and older as well as by persons with reduced physical, sensory or mental capabilities or who lack experience and knowledge if they are su- pervised or if they have been trained with regard to the safe use of the tank and understand the resulting risks.
Personen im Original Ersatz für: Pufferboiler oder als Kopie ausge- Maßstab: G6/4" G6/4" G6/4" G6/4" Entstd. aus: händigt werden. 1:10 PZ - PZR - PZRR G6/4" ArtNr: G6/4" Thermical coating Thermical coating Thermical coating Eigentums- und Ur- Z-Nr.: device device device heberrecht vorbehalten.
Page 4
OPERATIONAL CONDITIONS AND IMPORTANT INFORMATION The device is only suitable for heating water production inside closed rooms and may only be instal- led by authorised specialists (taking the applicable standards into account, e.g. ÖNORM B2531-1, DIN 1988). Buffer tanks are suitable for all hot water central heating systems, no matter whether solid fuel or oil-fired boilers, heat pump, solar plant, gas or electric circulator.
Page 5
TANK WITH TUBE REGISTER (PZR/PZRR TYPES) Before bringing into use, the pipe registers must be flushed to remove any impurities from the heating circuit. The heating water must be treated in accordance with the national regulations and standards (e.g. ÖNORM H5195-1) during commissioning and comply with the regulations. If the water heater is heated by its heat exchanger, then it must be ensured that in no case the hot water temperature exceeds 85 °C, as otherwise the safety temperature limiter of the electric heater can trigger and render it inoperable.
TEMPERATURE DISPLAY, TEMPERATURE CONTROL FOR CHARGE PUMP In the case that external controls are installed, it must be ensured that the boiler temperature cannot exceed 95°C during practical operation. FIRST COMMISSIONING The room where the device is used must be frost-free. Initial commissioning and heating must be monitored by a specialist.
CHECK, MAINTENANCE, CARE Do not use any abrasive cleaning agents or paint thinners (e.g. nitro, trichloroethylene, etc.) to clean the device or the insulation. The best cleaning is to use a damp cloth adding a few drops of a liquid house- hold cleaner.
WARRANTY, GUARANTEE AND PRODUCT LIABILITY Warranty is made according to the legal provisions of the Republic of Austria and the EU. The prerequisite for honoring of warranty terms on the part of the manufacturer is presentation of a paid invoice for the purchase of the appliance in question, whereby the identity of the appliance including model and fabrication number must be indicated on the invoice and presented by the claim applicant.
Page 9
11. There is a charge for services provided outside of the context of these guarantee conditions. 12 In order for a warranty claim to be honored by the manufacturer, the appliance must be paid for in full to the ma- nufacturer and the claimant must have met all his obligations to his vendor in full.
Page 12
A-8720 Knittelfeld Telefon: (03512) 700-0 Fax: (03512) 700-239 Internet: www.austria-email.at E-Mail: office@austria-email.at Austria Email in your area? For addresses and telephone numbers of our subsidiaries, visit our homepage at www.austria-email.at Print errors and changes of all kinds are reserved. Reproduction prohibited.
Need help?
Do you have a question about the PZ and is the answer not in the manual?
Questions and answers