Table of Contents
Advertisement
Quick Links
Pneumatic Arm Single Laptop Desk Mount
Instruction Manual
SKU: STAND-V101L
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v101l
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V101L
Summary of Contents for Vivo STAND-V101L
- Page 1 Pneumatic Arm Single Laptop Desk Mount Instruction Manual SKU: STAND-V101L Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v101l GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 9.9lbs 2.2-17.6lbs Failure to do so may result in serious injury. (4.5kg) (1-8kg) Phillips Screwdriver LAPTOP MONITOR ASSEMBLY STEPS STEP 1 OPTION A: Clamp Installation Adjust clamp (B) height according to thickness of desktop. Attach clamp cover (C) to clamp (B). Secure pole (E) to clamp (B) using three bolts (H).
- Page 4 STEP 2 Slide cable management clip (F) over top of pole (E). Slide monitor arm (A) over pole and tighten bolt using 6mm Allen wrench (L). OPTION A: MONITOR STEP 3 OPTION A: Flat Back Monitor OPTION B: Curved Back Monitor Attach VESA plate (D) to the back of Attach VESA plate (D) to the back of the monitor the monitor using bolts (M-A, M-C) and...
- Page 5 OPTION A: MONITOR STEP 5 Organize cables and re-attach cover. OPTION A: MONITOR STEP 6 Adjust gas spring support in arm using 6mm Allen wrench (L). Turning counter-clockwise increases support, and clockwise decreases. Adjust tilt support using 6mm Allen wrench (L). OPTION A: MONITOR STEP 7 Adjust monitor position as desired.
- Page 6 OPTION B: LAPTOP STEP 3 Place laptop arms (N) underneath each side of laptop tray (M), aligning square holes in arms with the edge and long slot on each side. Insert clips (O) through top to secure arms, making sure all 4 locks on each clip are engaged with square holes in arms.
- Page 7 OPTION B: LAPTOP STEP 7 Remove the bottom cover from arm (A). OPTION B: LAPTOP STEP 8 Organize cables and re-attach cover. OPTION B: LAPTOP STEP 9 Adjust gas spring support in arm using 6mm Allen wrench (L). Turning counter-clockwise increases support, and clockwise decreases. Adjust tilt support using 6mm Allen wrench (L).
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! AVG. RESOLUTION TIME : 5M 4S 309-278-5303 (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V101L and is the answer not in the manual?
Questions and answers