Settings Of Switched Outputs Exit 2; Submenu General Settings; Time And Date Settings; Language Settings - GSE 16A Manual

Settings of switched outputs EXIT 2

Select "Output 2" and repeat the same procedure as described for "Output 1".
Navigate in the main menu to "General settings.", press ENTER to get the selection. Select one
of the following settings that you want to change.
Here can be made all the general settings for the 16A fan controller:
Set date / time
Set language
Set photosensor
Set display
Set alarm
Set log file
Res. factory set

Time and date settings:

Press ENTER to set date and time in the sub menu "Set date / time". As first you have to set the date
in the format day, month, year. After this set the time in hours and minutes. The first day field starts to
blink, now you can set the day with the buttons UP / DOWN. Press ENTER to confirm and move to
the next months field. Repeat the procedure and make set the year. Press ENTER again and set the
hours field, repeat the procedure for the minutes. Save the settings you have made with SAVE /
EXIT and return to the selection menu "General settings."

Language settings:

Go to the menu "Language Settings. Press ENTER to set Languages in the sub menu "Set
language" The preferred language starts blinking. Select with the UP / DOWN buttons the desired
language, confirm with SAVE / EXIT. The new language is activated now.

Light sensor settings:

16A Fan controller

Submenu general settings

Set time
Set language
Set photosensor
Set display
Set alarm
Set log file
Res. factory set.
= Time and date settings
= Language settings
= Light sensor settings
= LCD Display settings
= Alarm settings
= Recording of historical data (Only for model with USB)
= Reset to factory settings
Photosensor
Switch at:
Switch time 300s
35
%
50
%
EN
13
27