Settings Of Switched Outputs Exit 1 - GSE 16A Manual

Select the desired setting, which you like to change, e.g. "Vent. Day. " Now, the value starts
flashing which can be changed with the UP DOWN buttons. Press once to change by 0.1 or
hold the button to change the value fast. If you have set the desired value, save the new setting
with the SAVE / EXIT button.
Repeat this procedure to change all other values in the menu.
With the SAVE / EXIT button to return back to the sub menu fan settings. Repeat this procedure for
the humidity setting. The third setting you can find the fan settings. Under this sub menu, you get the
following settings:
EN
1. Minimum speed = Minimum speed setting (exhaust fan)
2. Maximum speed = Maximum speed setting (exhaust fan)
3. Negative pressure = Negative pressure setting (intake air fan)
Here you can set the minimum and maximum speed of the exhaust fan. These values will never be
exceeded in day and night mode and are always the same. The supply air fan don't have a minimum
speed value and will turn off when the temperature and humidity undercuts the set value. By setting
of the minimum speed value at the exhaust fan you avoid odours escape through small openings in
the room. By setting the maximum speed value you avoid the fans making to much noise on full
load. The third setting you have the negative pressure, this setting reduces the intake fan speed
according the value of the exhaust fan speed and work synchrony together. For example: If we set a
-20% negative pressure, the exhaust air fan operates at full load 100%, the intake fan will have
80%. The Exhaust fan removes more air from the room as the intake fan blows inside and you
obtain a guaranteed negative pressure during the regulation. If the exhaust fan runs at 50% then the
intake air fan runs at 40%. -20% of its power. You can see this current ratio in the main screen part 2.
In the main menu you find "Set exit 1" = Settings output exit 1. Push the ENTER button to get
one level deeper into the menu. Than push again to "choose function". The following functions
are available:
24
16A Fan controller
Submenu fan settings
Set temperature
Set humidity
Fan settings
Fan settings
Minimum speed
Fan1
Maximum speed
Fan1
Negativepressure
Fan2

Settings of switched outputs EXIT 1

10
%
100
%
-50
%