Summary of Contents for Rockwell Automation Allen-Bradley PanelView 800
Page 1
PanelView 800 HMI Terminals Catalog Numbers 2711R-T4T, 2711R-T7T, 2711R-T10T User Manual Original Instructions...
Page 2
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.
No special knowledge is required to understand this manual or operate the terminal. Equipment installers must be familiar with standard panel installation techniques. (a) The web browser feature is not supported on PanelView 800 terminals from firmware revision 3.011 onwards. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Contact your local Allen-Bradley distributor or sales representative. • Go to the Rockwell Automation Product Compatibility and Download Center at rok.auto/pcdc. IMPORTANT You must sign in to the Rockwell Automation website before downloading a firmware revision. Additional Resources These documents contain additional information concerning related products from Rockwell Automation.
(a) The web browser feature is not supported on PanelView 800 terminals from firmware revision 3.011 onwards. (b) The PanelView Explorer feature is not supported on PanelView 800 terminals from firmware revision 3.011 onwards. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 12
USB device port (1) The Power Status LED is red when in screen saver or dimmer mode and green when in normal (operational) mode. (2) The USB device port is not intended for Customer use. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
You can find the IP address on the terminal configuration screen under Communications. The web browser feature is only supported on PanelView 800 terminals IMPORTANT with firmware revision 2.020 or earlier. It is not supported from firmware revision 3.011 onwards. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
These are the available PanelView 800 terminals. Configuration Cat. No. Operator Input Size Display Type 2711R-T4T Touch screen and function keys 4 in. Color TFT 2711R-T7T Touch screen 7 in. Color TFT 2711R-T10T Touch screen 10 in. Color TFT Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Firefox browser Ethernet connectivity On Terminal Configuration (a) The web browser feature is not supported on PanelView 800 terminals from firmware revision 3.011 onwards. For more information about the PanelView Explorer feature, see Appendix Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
• change the FTP server settings. (a) The PanelView Explorer feature is not supported on PanelView 800 terminals from firmware revision 3.011 onwards. For more information about the PanelView Explorer feature, see Appendix Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
At runtime, diagnostic messages appear in the same language as the IMPORTANT application if the application language is English, Portuguese, French, Italian, German, Spanish, Chinese, or Korean. For all other languages, the diagnostic messages appear in the configuration language set on the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to reboot the terminal from the terminal. 1. Go to the main configuration screen. 2. Press Reset Terminal. 3. Press Yes to confirm. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Select Internal as the Source location of the application. 3. Select the location to copy the application from the To list, either USB or microSD card. 4. Select the name of the application from the Name list. 5. Press Copy. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
IMPORTANT To perform a copy or edit operation on a recipe of an application, that application must be unloaded or not running. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 23
4. Select the location where you want to copy the recipe from, or copy the recipe to. 5. Select the recipe from the recipe list. 6. Press Copy. IMPORTANT Copying out a recipe from a design secured application is not allowed. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 24
6. Press the blue area next to Name to change the name of the recipe. Deletion of a recipe in a design secured application is not allowed. IMPORTANT 7. Type in the desired name using the on-screen keypad, then press Enter. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
1. Go to the File Manager screen. 2. Use the up and down arrow keys to select the application that you want to copy the alarm history from. 3. Press Copy Alarm History. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Press Controller Settings. Controller Settings Application Name: PV800_App1 Protocol: Ethernet | Allen-Bradley MicroLogix/ENI PLC-1 : 10.116.37.12 Type: MicroLogix 1400 Address: 10.116.37.12 Back 3. Press the blue area next to Address to change the address. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The terminal prompts an alert (ID: 2058) when you try to do so. Follow these steps to set a static IP address for the terminal’s Ethernet port from the terminal. 1. Go to the Terminal Settings screen. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 29
4. Press Set Static IP address screen appears. Static IP Address IP Address: 0.0.0.0 Mask: 0.0.0.0 Gateway: 0.0.0.0 Back 5. Press the blue area next to IP address to enter an IP address in the Static IP address field. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Disable DHCP Status: Unavailable Set Static IP Address Device Name: PV800T7T Node Address: VNC Settings IP Mode: DHCP Port Settings IP Address: 0.0.0.0 Mask: 0.0.0.0 FTP Settings Gateway: 0.0.0.0 Back MAC Address: XX:XX:XX:XX:XX Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Recipe folders on the terminal. To access the contents of these folders, permissions must be configured in Connected Components Workbench software. See Configure FTP Settings on page The Alarm History folder contains only the alarm history of the current running application on the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 32
Back MAC Address: XX:XX:XX:XX:XX 3. Press FTP Settings. FTP Settings FTP Server: Enable / Disable Status: Disabled Back 4. Press Enable/Disable to enable the FTP server. The Status now displays the text “Enabled”. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
“ESC” key on the keyboard to cancel the procedure. Follow these steps to calibrate the touch screen from the terminal. 1. Go to the Terminal Settings screen. 2. Press Display. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 34
1 mm (0.040 in.) to prevent damage to the touch screen. 1. With a stylus, tap the center of the target (+) on the terminal screen. 2. Repeat step 1 as the target moves around the screen. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
3. Select the degree of orientation (0 – Landscape, 90 – Reverse portrait, or 270 – Portrait). 4. Press Back to return to the main configuration screen. 5. Press Reset Terminal, then press Yes to confirm. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to configure the screen saver from the terminal. 1. Go to the Terminal Settings screen. 2. Press Display. Display Brightness Calibrate Touchscreen Orientation (Requires Reset) 0 degrees Screen Saver Font Back Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Choices are 1, 2, 5, 10, 15, 20, 30, or 60 min Delete Fonts To add fonts to the terminal, see Add Fonts to the Terminal on page Follow these steps to delete fonts from the terminal. 1. Go to the Terminal Settings screen. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to change the error alert display settings from the terminal. IMPORTANT Make sure that the application is not running before you make any changes. We recommend that you enable error alerts to allow diagnostics and communications error messages to display. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to configure the print settings. 1. Go to the Terminal Settings screen. 2. Press Print Settings. Print Settings Printing Port: Paper Settings Ethernet Print Settings Back 3. Select the Printing Port to use (USB or Ethernet). Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 40
It is not necessary to configure the Ethernet print settings if you are not printing through a print server. 1. Press Ethernet Print Settings. Ethernet Print Settings Network Share Path: Username: Password: Domain: Edit Credentials Back Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 41
Print button. 2. Drag-and-drop a Print button from the Toolbox window to your application screen. 3. Right-click the Print button and select Properties. 4. In the Properties window, configure the Print Type setting. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to view system information from the terminal. 1. Press System Information. The system information screen displays firmware revision, boot code version, logic board version, terminal on time, display on time, and battery status. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
(for example, an Ethernet application on a terminal without an Ethernet network connection). PanelView 800 applications are saved with a “.cha” file type. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 44
Chapter 2 Configure the Terminal Notes: Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Applications that are designed for the CompactLogix 5370 controllers must be validated before running on the terminal. You can download the latest version of Connected Components Workbench software at rok.auto/ccw. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Your computer information can be found by right-clicking My Computer and then selecting Properties. Follow these steps to install Connected Components Workbench software. Connected Components Workbench software version 11 is used in the following examples. 1. Run the executable file. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 47
“Customize” to select the individual components to install. 3. If you chose “Customize”, select the components that you want to install, then click Install. Certain components are pre- selected for you and cannot be unchecked. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 48
Chapter 3 DesignStation in Connected Components Workbench Software 4. Review the license agreement and click Accept all to proceed with the installation. 5. The next screen provides a visual indication of the installation progress. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Windows Start menu items that were originally installed with this software. Follow these steps to uninstall Connected Components Workbench software. 1. Run the same executable file used to install Connected Components Workbench software. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 50
Controller - Micro800 3. After you have unselected the checkboxes of the components that are listed above, you can then unselect the checkbox for Connected Components Workbench software. Click Install to proceed with the uninstallation. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 51
DesignStation in Connected Components Workbench Software 4. The next screen provides a visual indication of the uninstallation progress. 5. When the uninstallation is successfully completed, a final confirmation screen is shown. Click Close to end the uninstallation process. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Connected Components Workbench software version 9 or later to be installed. Follow these steps to change the repeat settings for keys using Connected Components Workbench software. 1. Go to the Settings tab for your PanelView 800 terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Only for firmware revision 2.020 or earlier - PanelView Explorer using Ethernet • For firmware revision 3.011 or later - CIP™ Ethernet - CIP Bridge connection through CompactLogix™ 5370 controller - CIP Bridge connection through Micro800™ controller Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to upload an application from the terminal. 1. From the Project Organizer, right-click the PanelView 800 terminal, then click Upload. Alternatively, click the Upload icon in the Settings tab of the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Click Create Recipe to add a recipe to the recipe list. A recipe is added to the list. The default name is RECIPE_01. 3. You can change the Recipe Name and Recipe Filename by clicking the Recipe Details button next to the Recipe. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
3. Under FTP Accessibility Settings, select the checkbox for the folders that you want to grant access to. If the checkbox is not selected, the contents of that folder will not be shown. None of the checkboxes are selected by default. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The email can be sent to one or more recipients and you can also choose to send attachments such as a screen capture of the current screen or the datalog file of the application. The Email feature is not available for CompactLogix 5370 controllers. IMPORTANT Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 59
• Email Address = The “From” or “Sender” email address associated with the account when sending an email. 5. Under the Recipients Settings configuration, enter the email addresses of the recipients in the “To”, “Cc”, and “Bcc” fields as required. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 60
To change the runtime email configuration of the Email button, memory tags, external tags, or system tags can be used for the runtime format of the email Subject, Body, and To/Cc/Bcc email addresses. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
See Select a Terminal Language on page 19. The “Gulim” font will not appear in the Font screen and cannot be deleted unless you restore or return the terminal to out-of-box condition. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 62
Open. The font is now imported into your application. 4. To change the font for an individual object, select the font from the object properties. Here are some examples. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. If the font you want to download to the terminal is not shown in the Download Font window, click Import. 3. Browse your computer for the font, then select it and click Open. The font is now imported into Connected Components Workbench software. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The Connected Components Workbench software connects to the terminal and downloads the screen saver. To select and configure a screen saver to use, or delete a screen saver from the terminal, see Configure Screen Saver Settings on page Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Drag-and-drop a Trend object from the Toolbox onto the screen. 3. Double-click the Trend object. The Pens window appears. 4. Modify the fields as required. 5. Click Add if more pens are required. 6. Click OK when finished. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to add an Alarm List object to your PanelView 800 application. 1. In Connected Components Workbench software, double-click an application screen to open it. 2. Drag-and-drop an Alarm List object from the Toolbox onto the screen. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to import CompactLogix controller tags into your PanelView 800 application. 1. In the Tag Editor tab, click the Import. 2. In the submenu, select CompactLogix. The open file dialog appears. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 68
“TagName.Data/0” by default after it has been imported to your PanelView 800 application. For more information on the differences in supported data types between PanelView 800 terminals and CompactLogix 5370 controllers, see CompactLogix 5370 Controller Addressing on page 133. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Click Yes to import all selected tags and overwrite existing tags, or No to only import tags that do not exist in your application. The Import tag result is show in the Output pane. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
In Connected Components Workbench software version 11 or later, you can Language List export and import a language list for your PanelView 800 terminal. This makes it easier to translate text strings and update them in your application. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
An error message appears if one of the following conditions is true: • The file does not reside in the local computer. • The file does not have the extension “.xlsx”. • The file is being used by another application. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to enable the tag name to be updated automatically: 1. From the Tools menu, select Options..2. Select Graphic Terminals -> Preferences from the list of options. 3. Select the checkbox. 4. Click OK. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
From the States screen, scroll to the right to configure the last five properties, if necessary. If Animation With Tag is selected, the following tags are configurable: • Height Tag • Horizontal Position Tag • Vertical Position Tag • Visibility Tag • Width Tag Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Trigger Tag Assign a tag to trigger this Memory tag Time Entry Data Type Connected Components Workbench software version 13 or later adds support Support for the Time data type for Micro800 controllers. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Enter the name of the object to search for it in the list. Filter on screen Filters the objects in the application screen that match the name entered in the Search Object field. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 76
Chapter 3 DesignStation in Connected Components Workbench Software Notes: Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Enter the new password in the Password and Confirm Password fields. Use the following guidelines when creating a password: • passwords must be 8...32 characters in length • valid characters are uppercase and lowercase letters, numbers, symbols found on the keyboard and spaces Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Use the following guidelines when creating a password: • passwords must be 8...32 characters in length • valid characters are uppercase and lowercase letters, numbers, symbols found on the keyboard and spaces Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Protect the application from updates by restricting user access to design mode. Only users with design rights are allowed to access and update an application. Initially, all users have design rights to an application. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
1. In the main screen of Connected Components Workbench software, click the Settings tab for your PanelView 800 terminal. 2. Click User Accounts in the options list. User Accounts Screen screenshot < > Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to add user accounts to the application. 1. Select the Design Environment Secured checkbox. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
To select multiple rows, hold down the CTRL or SHIFT key and click the desired rows. If you delete all users, then you are left with All Users* which gives any user unrestricted access to the application. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
You can create a right for each screen in the application and assign these rights to users based on the screens you want them to access at runtime, or you can Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Select the checkbox to assign the right to a user account. Managing Rights To delete a right, click the column header to select it and click the Delete Right(s) button. Any assignments of that right to users are also deleted. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
1. In the Properties panel of the screen, locate the Access Rights setting under the Screen category. 2. Click the drop-down arrow and select the right you want to assign from the list. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
If the active screen is unsecured, the screen remains active. If the active screen is a secured screen: • the current user is logged off. • the current access right tag is cleared. • the application changes to the startup screen. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Terminal Operations and Protected Mode State Operation Terminal in Protected Mode During the boot-up process. After the boot-up process and the terminal displays a terminal configuration screen. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 88
Internal Internal Delete PV800_App1 Set As Startup PVcApplication1 Stop Application Recipe Copy Alarm History Controller Settings Startup Application Reset Main The Stop Application button is only available in firmware revision 3.011 IMPORTANT onwards. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Mobile and Tablet – Android None • Change Color Level from “pal8” to “Full” for a clearer Real VNC display. PC/Laptop – Windows 7 • Change Security Notification Timeout from “2500” to “0” in the client options. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
English Português Terminal Setting Français Italiano Month Minute Deutsch Español 简体中文 Year Second System Information Reset Terminal 2015 2. Press Terminal Setting. Terminal Setting Communication Display Error Alert Display Settings Print Settings Main Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 91
(2) Once a password is set, you can only change it. You cannot clear a password unless you perform a restore operation or return the terminal to the out-of-box condition. See Returning to the Out-of-box Condition on page 103 Restoring the Terminal on page 104 for instructions. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
A window opens on your desktop showing the current screen on the terminal. 4. To terminate the VNC connection to the terminal, simply close the VNC. Viewer application. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to view the system information on your terminal. 1. Go to the PanelView Explorer Startup window. 2. Click the Terminal Settings link. 3. Click the System Information tab. 4. View the information. 5. Click Apply. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Set this external tag as write and remove panel devices from your application that can read data from this external tag. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 97
Add a Recipe Table Panel device to the Screen. Recipe /*S:0 Param1*/ operation was not started because the Wait for a recipe operation to complete before starting the next Recipe 1018 system is currently busy performing another Recipe operation. recipe operation. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 98
Insufficient space to complete file copy. Remove files to free space from the destination and try again. Alert 2022 Source and destination cannot be the same. Verify the source and destination are not the same and retry. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 99
Alert 2054 Cannot reset the terminal in Safe mode. then select File>Reset>Hard to reboot the emulator. Alert 2055 Image exceeds maximum resolution of 800x800. Open file in image editor and reduce the resolution. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 100
Password cannot be empty. Enter valid password. Alert 2085 Enable Ethernet port. Confirm Restart? Press Yes to restart the terminal. Alert 2086 Disable Ethernet port. Confirm Restart? Press Yes to restart the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Determine what changed since the last time the terminal ran normally and decide if the change can be reversed. Check for Adequate Power A terminal that does not receive adequate power could cause unpredictable behavior. Verify the power requirements in the Specifications table. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Application Load and Execute Load N4…N6 POST errors are fatal and most likely due to failed hardware. A fatal error during firmware installation and loading is most likely recoverable by installing the appropriate firmware. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Press Yes or F1 to return to the out-of-box condition, or press No or F2 to cancel. If you choose to return to the out-of-box condition, the terminal resets. On the subsequent boot, the file system is formatted and removes the contents including applications, logs, recipes, user-installed fonts, Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 (1) See the Product Certification link at rok.auto/certifications for Declarations of Conformity, Certificates, and other certification details. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
IMPORTANT Terminate the VNC connection before performing a firmware update as it may interfere with the process. 1. Backup applications and library objects from the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 110
If you have not saved changes to the application, you are prompted to do so. Once the application is unloaded, the terminal displays the Configuration screen. 3. Close the web browser connected to the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
See the details in step 3 for more information. Follow these steps to upgrade the firmware using ControlFLASH. 1. Verify that the terminal is connected to your computer either through Ethernet or USB. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 112
The Firmware Kit Locations dialog box appears. b. Click Add. c. Select the folder that contains the firmware DMK file, and then click OK. d. Click OK to close the Firmware Kit Locations window. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 113
Appendix B Upgrade Firmware 5. Select the terminal in the connection browser window and click OK. 6. Select the firmware revision to flash and click Next. 7. Verify your selections and click Finish. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 114
Memory Usage (bytes) Internal Used: 1,392,640 Internal Free: 164,741,120 Advanced Application Used: 31,600,640 Main Application Free: 193,994,752 View System Information on page 42 for instructions on how to view the current firmware revision. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Be aware of the firmware revision for the terminal versus the new firmware that is on the computer, and be informed of the expected behavior after the new firmware is installed on the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Do not remove the microSD card or USB flash drive until upgrade - OK is displayed. When the firmware installation is complete and successful, the progress bar stops with the success code OK. 4. The terminal will automatically restart to complete the process. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 117
Memory Usage (bytes) Internal Used: 1,392,640 Internal Free: 164,741,120 Advanced Application Used: 31,600,640 Main Application Free: 193,994,752 View System Information on page 42 for instructions on how to view the current firmware revision. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 118
Appendix B Upgrade Firmware Notes: Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
• USB flash drive • Battery replacement microSD Memory Card The microSD memory card can be inserted in the following locations on the PanelView 800 terminals. 2711R-T4T 2711R-T7T 2711R-T10T microSD memory card slot Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
For safety information on the handling of lithium batteries, see the Guidelines for Handling Lithium Batteries, publication AG-5.4. Do not dispose of battery in a fire or incinerator. Dispose of used batteries in accordance with local regulations. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 121
This equipment is sensitive to electrostatic discharge (ESD). Follow ESD prevention guidelines when handling this equipment. Battery Battery cover This equipment is sensitive to electrostatic discharge (ESD). Follow ESD prevention guidelines when handling this equipment. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 122
Appendix C Install and Replace Components Notes: Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
(EMI). Grounding minimizes noise from EMI and is a safety measure in electrical installation. For more information on grounding recommendations, see the National Electrical Code published by the National Fire Protection Association. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Ethernet (AB CIP) Ethernet 2711P-CBL-EX04 (CAT5 Ethernet) — 2711P-CBL-EX04 (CAT5 Ethernet) Serial (AB CIP) RS-232 1761-CBL-PM02 1761-CBL-PM02 – (1) Terminal block, wiring required. (2) RS-485 is isolated. We recommend that you connect only one device. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The base-configured unit of the terminals has an RJ45, 10/100 Base-T connector for Ethernet network communication. 2711R-T4T 2711R-T7T 2711R-T10T Ethernet port Ethernet Connector Pinout Pin Name Looking into RJ45 Connector Shield Connection Chassis Gnd Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
DF1 full-duplex communication with controllers using direct connections or modem connections. • third-party point-to-point communication. The serial port on the terminal is a 9-pin, male, RS-232 connector. An example with the 1761-CBL-PM02 cable is shown here: Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The RS422/485 port has integrated 120 ohm termination between the R and R- signal pair. This value is compatible with RS422 and RS-485 electrical specifications. Additional termination on the PanelView 800 terminal end of communication cables is not required. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
USB flash drive or microSD card from being accidentally disconnected. Also, do not power off the terminal while a firmware upgrade is in progress. USB hubs can produce unexpected behaviors and as a result are not recommended. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Add a CompactLogix 5370 To add a CompactLogix 5370 controller to your application, do the following: Controller 1. Click on the Settings tab for your PanelView 800 terminal in Connected Components Workbench software. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
CompactLogix 5370 controllers.) To add tags, do the following: 1. Double-click Tags in the Project Organizer to open the Tag Editor tab. 2. Click the Add button to create a new tag entry. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Click the Validate icon on the Settings tab of the terminal. 2. Make sure that there are no validation errors in the application. If the validation passes, the Validity will be set to True. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Select the terminal that you want to download the application to, then click OK. Upload the Application To upload the application to the terminal, do the following. 1. Click the Upload icon in the Settings tab of the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
CompactLogix 5370 controller can be accessed from PanelView 800 terminals from their respective members, which are based on the above atomic data types The LINT data type is not supported in CompactLogix 5370 controllers. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Tag2[x,y,z] Program:MainProgram.Tag2[x,y,z] 1,2,3 16-bit integer Tag3[x,y,z] Program:MainProgram.Tag3[x,y,z] 1,2,3 8-bit integer SINT Tag4[x,y,z] Program:MainProgram.Tag4[x,y,z] 1,2,3 Real REAL Tag5[x,y,z] Program:MainProgram.Tag5[x,y,z] 1,2,3 String STRING 1,2,3 (1) Tag6[x,y,z].Data/N – N is the length of String. (2) Program:MainProgram.Tag6[x,y,z].Data/N Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
L3 controllers are supported only in PanelView 800 terminals with firmware revision 4.012 or later. Connected Components Workbench software version 9 or later is also required. • FTP and Email features are not supported. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 136
Appendix E Using PanelView 800 Terminals with CompactLogix 5370 Controllers Notes: Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The browser interface requires a computer browser connected to the terminal's web service through an Ethernet network connection. The configuration data for a terminal refers to the collection of all of the system interface parameters. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The recommended browsers to use are: • Internet Explorer 7 or 8 • Firefox 3.0 If you use a browser other than a recommended browser, you may encounter messages similar to the following examples. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Adjusting Settings on the PanelView Explorer Startup Window From the PanelView Explorer Startup window, you can view and edit settings for the connected PanelView 800 terminal. The settings take effect immediately. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
At runtime, diagnostic messages appear in the same language as the IMPORTANT application if the application language is English, Portuguese, French, Italian, German, Spanish, Chinese, or Korean. For all other languages, the diagnostic messages appear in the configuration language set on the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
2. Click the Terminal Settings link. 3. Click the Display/Input tab. 4. Drag the slider to adjust the brightness level between 1…100%. 5. Click Apply, or click Cancel to restore the current terminal settings. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
6. Drag the slider to adjust the screen saver brightness. 7. Click Apply, or click Cancel to restore the current screen saver settings. To disable the screen saver or dimmers, select Disable Screen Saver and Dimmer from the screen saver mode list. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The new screen saver takes affect the next time the screen saver is activated. Your bitmap file should be small in size. A large bitmap will impact performance of terminal operations. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Over time you may notice that the objects and images on the display screen don’t seem to fit the display area as well as they once did. This is normal with a touch screen and can be easily fixed. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 145
Follow these steps to complete the calibrate touch screen procedure. 1. With a stylus, tap the center of the target (+) on the terminal screen. 2. Repeat step 1 as the target moves around the screen. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Follow these steps to reboot the terminal from PanelView Explorer. 1. Go to the PanelView Explorer Startup window. 2. Click the Terminal Settings link. 3. Click the Display/Input tab. 4. Click Reboot Terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
3. Click the System Information tab. 4. Update the Current date fields. 5. Update the Current time fields. 6. Check Automatically adjust for daylight savings time if you want the terminal to adjust for daylight savings time. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
PanelView Explorer Startup window. Follow these steps to secure the PanelView Explorer Startup window. 1. Go to the PanelView Explorer Startup window. 2. Click the Terminal Settings link. 3. Click the Terminal Security tab. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 149
You can transfer this file to other terminals without having to manually reenter the information. Use the File Transfer link on the PanelView Explorer Startup window and transfer the Terminal User file from internal storage to your computer, USB, or SD storage. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
IMPORTANT terminals with firmware revision 2.020 or earlier. It is not supported from firmware revision 3.011 onwards. A file transfer operation requires you to choose a source location, file type, and destination location. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
The PanelView Explorer feature is only supported on PanelView 800 terminals with firmware revision 2.020 or earlier. It is not supported from firmware revision 3.011 onwards. Font files cannot be imported from PanelView Explorer when using firmware revision 3.011 or later. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
10. Reboot the terminal to remove the file from the terminal. Font files, especially East Asian Fonts, are large and consume significant space on Internal Storage. Remove all unused fonts from the terminal. Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 156
Index Notes: Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 157
PanelView 800 HMI Terminals User Manual Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021...
Page 158
Allen-Bradley, CompactLogix, Connected Components Workbench, ControlFLASH, expanding human possibility, FactoryTalk, Guardmaster, MicroLogix, Micro800, Micro820, Micro830, Micro850, Micro870, PanelView, Rockwell Automation, Studio 5000, Studio 5000 Logix Designer, and TechConnect are trademarks of Rockwell Automation, Inc. CIP and EtherNet/IP are trademarks of ODVA, Inc.
Need help?
Do you have a question about the Allen-Bradley PanelView 800 and is the answer not in the manual?
Questions and answers