Optional Accessories (Rack Mount Only); Rack Mount Kit; Hanging Hardware Kit - ETC Response MIDI Gateway Setup Manual

ETC Setup Guide
Response MIDI Gateway Setup Guide

Optional Accessories (Rack Mount Only)

The following accessories are available for use with the rack-mounted Response MIDI Gateway.

Rack Mount Kit

4260K1001: The Gateway Rack Mount kit is capable of holding up to two gateways for mounting into a
standard 19" rack enclosure. If you only need to mount one unit, a blanking plate is provided with the kit.
This blanking plate can be installed on either side of the rack mount bracket.

Hanging Hardware Kit

4260K1005: The Hanging Hardware Kit allows pipe mounting of a gateway in a variety of orientations.
You can vary the way the U-bolt (or c-clamp) attaches to the bracket and the way the bracket mounts to
the gateway. The bracket attaches to any edge on the bottom of your gateway.
Response MIDI Gateway Page 5 of 5 ETC