Download Print this page
ETC Response Setup Instruction
ETC Response Setup Instruction

ETC Response Setup Instruction

Midi gateway

Advertisement

Quick Links

ETC Setup Guide
Response MIDI Gateway
Overview
The Response MIDI Gateway supports sending and receiving MIDI (Musical Instrument Digital Interface)
control signals. MIDI enables various types of equipment to communicate, control and synchronize with
each other through the transmission of digital data. For MIDI output the signal is generated by the
controlling device and transmitted to the MIDI Gateway over USB or an Ethernet network to be output
locally at the gateway. The gateway itself does not generate MIDI messages.
MIDI In port
MIDI Thru port
MIDI Out port
MIDI Connections
The following connections are available:
• MIDI In - allows communication from a MIDI device to a Net3 controller, ACN controller or USB MIDI
receiver through the gateway. The input accepts MIDI notes, MIDI Show Control packets and MIDI
Time Code.
• MIDI Thru - allows communication between multiple MIDI devices by passing the input through the
gateway and back out to another MIDI device.
• MIDI Out - allows communication with a MIDI device from a Net3, ACN or USB control source through
the gateway. Outputs MIDI notes, MIDI Show Control packets and/or MIDI Time Code.
The pinouts for the MIDI connections are as follows:
MIDI In
N/C
3
1
5
4
2
In-
N/C
LED Indicators
• Power - solid blue indicates that power is supplied
• Ethernet - solid green indicates network connection and blinking indicates network activity
• USB - solid green indicates USB connection and solid red indicates connection without having fully
detected, identified and loaded device drivers
Corporate Headquarters
London, UK
Rome, IT
Holzkirchen, DE
Hong Kong
Web:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
4267M2240
LED indicators
N/C
N/C
Thru-
In+
Middleton, WI, USA
Tel +44 (0)20 8896 1000
Service: (UK)
Tel +39 (06) 32 111 683
Service: (UK)
Tel +49 (80 24) 47 00-0
Tel +852 2799 1220
Service: (Asia)
etcconnect.com
© 2018 Electronic Theatre Controls, Inc.
Rev A
Released 2018-05
MIDI Thru
N/C
3
1
5
4
2
Thru+
Shield
Tel +608 831 4116
Service: (Americas)
service@etceurope.com
service@etceurope.com
Service: (DE)
techserv-hoki@etcconnect.com
service@etcasia.com
Navigation buttons
MIDI Out
N/C
N/C
3
1
5
4
2
Out-
Out+
Shield
service@etcconnect.com

Advertisement

loading

Summary of Contents for ETC Response

  • Page 1 Tel +852 2799 1220 Service: (Asia) service@etcasia.com   Web: etcconnect.com © 2018 Electronic Theatre Controls, Inc.  Product information and specifications subject to change. ETC intends this document to be provided in its entirety. 4267M2240 Rev A Released 2018-05  ...
  • Page 2 ETC Setup Guide Response MIDI Gateway Setup Guide Navigation Buttons • Up, Down, Back, Check Mark/Enter - The check mark allows you to advance to the next available menu or commit a modified selection. The back arrow allows you to return to the previous menu or option, and the up and down arrows navigate between lines in a menu.
  • Page 3 ETC Setup Guide Response MIDI Gateway Setup Guide Connect to your MIDI Gateway Over the Network Connect an Ethernet cable to the Ethernet port on you MIDI gateway and then connect the cable to a network switch on your Eos console’s lighting network.
  • Page 4 ETC Setup Guide Response MIDI Gateway Setup Guide Configure Network Settings To configure the network settings for your device, perform the following steps: From the home screen, select Setup > Network. From the Mode screen, you can use the up and down buttons to select Manual, Link Local or Automatic.